| Note
No. |
Date |
Title |
Author |
|
Note 69 |
01/12/2009 |
Modifications for Toshiba Ion Pump Control |
Keith Jobe |
| Note
68 |
2/22/01 |
H2 Firing of Stainless
Steel |
R.E. Kirby, C. Pearson |
| Note
67 |
2/6/01 |
Brand New Cell Autopsy |
R.E. Kirby, C. Pearson |
| Note
66 |
1/22/01 |
DDS2 Structure Autopsy |
R.E. Kirby, F. Marcelja |
| Note
65 |
11/12/98 |
Support function changes
to add a second klystron to an NLCTA modulator |
W. Baumgartner |
| Note
64 |
4/18/97 |
Calculating RF Profiles
for Beam Loading Compensation of Arbitrary Current Profiles |
C.D. Nantista, C.
Adolphsen |
| Note
63 |
4/1/97 |
Performance
Characteristics for XL4-2a |
A.E. Vlieks |
| Note
62 |
11/4/96 |
Emittance Measurement
Procedure |
C.D. Nantista, C.
Adolphsen |
| Note
61 |
7/17/96 |
Phasing Calculations for
Accelerator Sections with Same RF Source |
J.W. Wang |
| Note
60 |
6/5/96 |
Maximum Operating Voltage
for XL Series Klystrons |
R. Phillips, J. Rifkin |
| Note
59 |
4/12/96 |
Chicane, linac and
Spectrometer Magnets and Power Supplies |
C. Adolphsen, B.
Baumgartner J. Minister, J. Rifkin, V. Nesterov |
| Note
57 |
4/10/96 |
NLCTA Gun Tests, Gun Lot
A - Low Current |
D. Yeremian |
| Note
56 |
3/5/96 |
Low-Level RF Signal
Processing Software |
C. Ziomek |
| Note
55 |
2/22/96 |
Thermionic Gun Dimensions |
M. Palrang, Jeff Rifkin |
|
Note
54 |
8/23/93 |
Test Results of Magnum
I/Q Up / Downconverters (P/N MIQ64MS-2) |
S. Holmes, C. Ziomek |
| Note
53 |
2/5/96 |
Special Considerations
for the Klystron Mode Transducers |
M. Harding, E. Wright |
| Note
52 |
8/23/93 |
Test Results of Merrimac
I/Q Detector (P/N IQM-25D-11.4G/72596) |
Sharon Holmes, Chris
Ziomek |
|
Note
51 |
9/26/95 |
Analysis of Failure Modes
of the Average Current Limit for the NLCTA Thermionic Gun |
M. J. Browne |
| Note
50 |
8/23/95 |
NLCTA RF High Level
Controls Software. |
S. Allison, S. Clark |
| Note
49 |
7/5/95 |
BPM System Specification |
S. Smith |
| Note
48 |
5/30/95 |
Average Current Limit for
the NLCTA Thermionic Gun. |
M. Brown |
| Note
47 |
5/12/95 |
Beam current Diagnostics |
Christophser Nantista,
Chris Adolphsen |
| Note
46.2 |
1/8/96 |
Radiation Protection in
the NLCTA |
Vaclav Vylet &
Theodore Lavine |
| Note
45 |
3/31/95 |
Proposed PPS Access
Control System for the NLCTA |
Hal Smith, Bob Fuller,
and Pat Bong |
| Note
44 |
3/21/95 |
RF Phase Shifter
Specifications |
A. Young, A.E. Vlieks |
| Note
43 |
3/8/95 |
Klystron Phase Variation
due to Fluctuations in Beam Voltage |
E. Wright, R. Miller |
| Note
42 |
2/7/95 |
Proposed RF Monitor
Signal Processing |
T. L. Lavine, R.K. Jobe,
R.F. Koontz, A.E. Vlieks, A. Young |
| Note
41 |
1/23/95 |
NLCTA Four Port Coupler
Specifications |
A. Young, R. Koontz, M.
Byrne |
| Note
40 |
12/21/94 |
RF Cable Specifications |
A. Young, A.E. Vlieks |
| Note
39 |
1/11/95 |
Prebuncher Specifications |
J.Wang and H.Hoag |
| Note
38 |
11/21/94 |
RF Amplifier
Specifications |
A . Young, A. Vlieks |
| Note
37 |
11/18/94 |
NLCTA Kicker Requirements |
C. Adolphsen |
| Note
36 |
11/18/94 |
Klystron Specification
(Objective) SLAC XL-Series Pulse Amplifier |
E. Wright |
|
Note
35Aa |
|
RF
HEAD Specifications |
A . Young |
|
Note
35A |
11/18/94 |
Solenoid and Power Supply
Specification for XL-Series Klystron. |
E. Wright, S. Gold |
| Note
34 |
10/26/94 |
Minimum Length of SLED-II
Delay Lines |
T. L. Lavine and J. Wang |
| Note
33 |
10/5/94 |
Squeeze Type Phase
Shifter |
Juwen Wang, Roger Miller,
J.Rifkin |
| Note
32 |
10/5/94 |
Ion Pump Power Supplies |
R.Fuller, P.Holik,
T.Porter |
| Note
31 |
9/19/94 |
Tesla Solenoid Water
Cooling Test |
Richard F. Boyce |
| Note
30 |
9/19/94 |
Circular Copper Waveguide
Tubing Specs. |
Richard F. Boyce |
| Note
29.1 |
12/22/94 |
Injector Solenoid Power
Supplies |
R.Miller, J.Rifkin,
J.Wang, D.Yeremian |
| Note
28.1 |
11/8/94 |
Mechanical |
J. Rifkin |
| Note
27 |
8/19/94 |
Ramping SLED-II for
Beam-Loading Compensation |
C. D. Nantista |
| Note
26 |
7/11/94 |
Preliminary functional
specification for klystron phase-modulation control |
T. L. Lavine |
| Note
25 |
7/11/94 |
Preliminary functional
specification for SLED-II delay-line tuning control |
T. L. Lavine |
| Note
24 |
6/21/94 |
Design of pumping screen
for SLED-II adjustable short |
T. L. Lavine and A. E.
Vlieks |
| Note
23 |
4/6/94 |
Mechanical Specifications
for SLED-II Adjustable Shorts |
T. L. Lavine |
| Note
22 |
4/6/94 |
SLED-II Adjustable Short
Power Dissipation |
C. D. Nantista |
| Note
21 |
4/1/94 |
Analysis of Mechanical
Tolerances on Circular Waveguide and Flanges for the Low-Loss High-Power
Transmission Lines |
C. D. Nantista & T.
L. Lavine |
|
Note
20 |
3/24/94 |
Insulated Hollow Core
Copper Conductor |
Richard F. Boyce,
Cherrill Spencer |
| Note
19.8 |
8/14/95 |
Device List |
C.Adolphsen, R.Fuller,
J.Rifkin |
| Note
19.7 |
2/16/95 |
Device List |
C.Adolphsen, R.Fuller,
J.Rifkin |
| Note
18 |
3/8/94 |
Molecular-transport
considerations in the design of the SLED-II vacuum system |
T. Lavine |
| Note
17 |
2/4/94 |
Mechanical Tolerances on
Circular Waveguide and Flanges for the SLED-II Delay Lines |
C. D. Nantista and T. L.
Lavine |
| Note
16 |
2/3/94 |
SLED-II Delay-Line Length
Stabilizaton |
T. Lavine, C. Nantista,
Z. Farkas |
| Note
15 |
1/14/94 |
Gun Pulser Specification |
Dian Yeremian, Roger
Miller |
| Note
14 |
1/13/94 |
Beamline Global
Coordinate System |
C. Adolphsen, R. Boyce,
T. Montagne and M. Pietryka |
| Note
13 |
11/11/93 |
Beam Dump |
D. Walz |
| Note
12 |
10/26/93 |
BPM Title Convention |
T. Montagne, J. Rifkin,
S. Smith |
| Note
11 |
10/11/93 |
Alignment Specifications |
C. Adolphsen |
| Note
10 |
9/7/93 |
Protection of Accelerator
Sections |
H.Hoag |
| Note
9 |
8/9/93 |
Distance
Between Accelerator |
H. Hoag, T. Lavine |
| Note
8.1 |
8/19/93 |
Magnet Design Guidelines |
C.Adolphsen, J.Rifkin,
J.Wang |
| Note
7.2 |
7/11/93 |
Magnet Power Supply
Specifications |
Chris Adolphsen |
| Note
6.1 |
9/21/96 |
Mechanical Drawing
Signatures |
Jeff Rifkin |
| Note
5 |
6/11/93 |
Cooling Water
Requirements |
Richard F. Boyce |
| Note
4.2 |
1/18/95 |
Drawing Numbers |
T. Montagne, J. Rifkin,
R. Boyce |
| Note
3 |
4/28/93 |
South Side Real Estate |
Jeff Rifkin |
| Note
2 |
4/28/93 |
Beamline Vacuum
Specifications |
Jeff Rifkin |
| Note
1.2 |
3/24/94 |
Beamline Naming
Conventions |
Chris Adolphsen, Bob
Fuller, Jeff Rifkin |
