|
|
Templates
Overview:
Templates will be used to position most components in the ring by marking
the anchor bolt locations on the concrete floor. They are divided into:
|
| Drawing No. |
Location |
No. Holes |
Length in |
Weight lbs |
| SA-444-323-50 |
1S, 8S, 10S, 17S |
8 |
173.46 |
51 |
| SA-444-323-52 |
2S, 4S, 14S, 16S |
8 |
108.25 |
31 |
| SA-444-323-54 |
3S |
9 |
108.25 |
31 |
| SA-444-323-56 |
18S-B |
32 |
137.00 |
44 |
| SA-444-323-58 |
9S-B |
12 |
191.30 |
43 |
| SA-444-323-62 |
5S, 13S |
12 |
108.25 |
48 |
| SA-444-323-64 |
18S-A |
36 |
154.57 |
31 |
| SA-444-323-66 |
9S-A |
8 |
109.40 |
31 |
| Drawing No. |
Location |
No. Holes |
Length in |
Weight lbs |
| SA-444-316-40 |
SLM-1 |
16 |
94.73 |
19 |
| SA-444-316-42 |
SLM-2 |
8 |
38.60 |
11 |
| SA-444-316-44 |
SLM-3 |
12 |
59.00 |
24 |
Details:
There are three steps to mark the anchor bolt locations on the new SPEAR3
concrete floor:
First, three alignment points specific to a template are located and marked.
Second, the template is placed over the marks and positioned so that the three
special Ø0.25 inch holes line up with the marks. Third, anchor bolts are spray
painted through the template using either green paint for the Ø0.875 inch holes
or red paint for the Ø1.250 inch holes. (See drawing No. ID-444-360-01.)
|
|
