SLAC Magnetic Measurements Date: 07-07-1995 Time: 09:09:15 Magnet Name (Serial #): 133 Bar Code Number: 177 Project: PEP II High Energy Ring Sextupoles Test Stand: IR8, S1, W Measurement Coil: # 1 Operator: pdr Run Number: 1 Comment: Standard Measurement Standardization Currents (A): 250.0 10.0 200.0 10.0 200.0 10.0 200.0 10.0 Test Currents (A): 25.0 50.0 100.0 125.0 150.0 175.0 200.0 150.0 100.0 50.0 25.0 Harmonics Measurements Date: 07-07-1995 Time: 09:39:36 Magnet Name: 133 Run Number: 1 FIELD HARMONICS Magnet Current, Imag = 25.60386 +- 2.728994E-03 A Coil Radius, Rcoil = .044882 m Coil # Turns, Nturns = 20 Average, # Rotations/Measurement = 10 , # Measurements = 4 Nmain = 3 N BLn sigBLn THspole sigTH BLn/BLN sBLn/BLN (Tm) (Tm) (deg) (deg) (%) (%) --- --------+-------- --------+-------- --------+-------- 1 0.00006 0.00000 -106.37 0.42 1.1283 0.0042 2 0.00008 0.00000 -59.64 0.16 1.4613 0.0022 3 0.00526 0.00000 30.13 0.00 100.0000 0.0299 4 0.00001 0.00000 -4.58 0.85 0.1098 0.0131 5 0.00001 0.00000 -17.19 0.64 0.1164 0.0151 6 0.00000 0.00000 -2.46 15.24 0.0144 0.0026 7 0.00000 0.00000 -14.22 2.08 0.0336 0.0079 8 0.00000 0.00000 7.68 3.17 0.0159 0.0063 9 0.00002 0.00000 -9.85 0.10 0.3318 0.0100 10 0.00000 0.00000 -2.97 12.81 0.0094 0.0051 11 0.00000 0.00000 4.18 6.37 0.0104 0.0026 12 0.00000 0.00000 -0.14 8.53 0.0123 0.0032 13 0.00000 0.00000 4.01 4.71 0.0117 0.0048 14 0.00000 0.00000 2.17 7.56 0.0092 0.0040 15 0.00000 0.00000 -5.74 0.38 0.0689 0.0052 16 0.00000 0.00000 1.35 5.23 0.0094 0.0037 The magnetic center is at X = 286.1 +- 1.0 microns Y = 160.3 +- 1.7 microns The magnetic center is measured relative to the coil axis effectively at the longitudinal center of the magnet. Pitch and yaw are not seen by the coil. View from the non-lead end of the magnet: y ^ | N S S --> x N N S Date: 07-07-1995 Time: 09:43:08 Magnet Name: 133 Run Number: 1 FIELD HARMONICS Magnet Current, Imag = 50.58838 +- 5.83346E-03 A Coil Radius, Rcoil = .044882 m Coil # Turns, Nturns = 20 Average, # Rotations/Measurement = 10 , # Measurements = 4 Nmain = 3 N BLn sigBLn THspole sigTH BLn/BLN sBLn/BLN (Tm) (Tm) (deg) (deg) (%) (%) --- --------+-------- --------+-------- --------+-------- 1 0.00008 0.00000 -103.89 0.51 0.7419 0.0018 2 0.00015 0.00000 -59.31 0.09 1.4683 0.0011 3 0.01028 0.00000 30.13 0.00 100.0000 0.0117 4 0.00001 0.00000 -5.40 0.50 0.1077 0.0034 5 0.00001 0.00000 -17.29 0.77 0.1194 0.0040 6 0.00000 0.00000 5.25 5.04 0.0090 0.0020 7 0.00000 0.00000 -13.04 1.03 0.0337 0.0035 8 0.00000 0.00000 6.28 1.20 0.0201 0.0037 9 0.00003 0.00000 -9.80 0.08 0.3307 0.0020 10 0.00000 0.00000 3.60 8.11 0.0037 0.0012 11 0.00000 0.00000 -1.37 3.45 0.0067 0.0037 12 0.00000 0.00000 -2.73 3.31 0.0077 0.0023 13 0.00000 0.00000 -0.84 6.86 0.0069 0.0032 14 0.00000 0.00000 4.22 3.98 0.0073 0.0031 15 0.00001 0.00000 -5.65 0.28 0.0752 0.0050 16 0.00000 0.00000 2.46 7.06 0.0075 0.0029 The magnetic center is at X = 289.3 +- 0.5 microns Y = 157.8 +- 0.9 microns The magnetic center is measured relative to the coil axis effectively at the longitudinal center of the magnet. Pitch and yaw are not seen by the coil. View from the non-lead end of the magnet: y ^ | N S S --> x N N S Date: 07-07-1995 Time: 09:46:44 Magnet Name: 133 Run Number: 1 FIELD HARMONICS Magnet Current, Imag = 100.5779 +- 2.30355E-03 A Coil Radius, Rcoil = .044882 m Coil # Turns, Nturns = 20 Average, # Rotations/Measurement = 10 , # Measurements = 4 Nmain = 3 N BLn sigBLn THspole sigTH BLn/BLN sBLn/BLN (Tm) (Tm) (deg) (deg) (%) (%) --- --------+-------- --------+-------- --------+-------- 1 0.00011 0.00000 -101.44 0.34 0.5467 0.0021 2 0.00030 0.00000 -59.17 0.03 1.4741 0.0010 3 0.02041 0.00001 30.13 0.00 100.0000 0.0399 4 0.00002 0.00000 -6.20 0.23 0.1181 0.0023 5 0.00003 0.00000 -16.99 0.29 0.1306 0.0024 6 0.00000 0.00000 22.82 6.24 0.0042 0.0025 7 0.00001 0.00000 -12.74 0.88 0.0335 0.0042 8 0.00000 0.00000 6.52 0.82 0.0156 0.0039 9 0.00007 0.00000 -9.88 0.09 0.3304 0.0034 10 0.00000 0.00000 -6.75 11.88 0.0053 0.0012 11 0.00000 0.00000 -7.38 8.90 0.0054 0.0031 12 0.00000 0.00000 -1.85 1.34 0.0094 0.0024 13 0.00000 0.00000 -1.12 7.16 0.0063 0.0022 14 0.00000 0.00000 2.40 1.64 0.0107 0.0017 15 0.00002 0.00000 -5.73 0.10 0.0737 0.0017 16 0.00000 0.00000 2.22 3.64 0.0055 0.0015 The magnetic center is at X = 291.2 +- 0.3 microns Y = 157.0 +- 0.4 microns The magnetic center is measured relative to the coil axis effectively at the longitudinal center of the magnet. Pitch and yaw are not seen by the coil. View from the non-lead end of the magnet: y ^ | N S S --> x N N S Date: 07-07-1995 Time: 09:53:41 Magnet Name: 133 Run Number: 1 FIELD HARMONICS Magnet Current, Imag = 150.5629 +- 3.127363E-03 A Coil Radius, Rcoil = .044882 m Coil # Turns, Nturns = 20 Average, # Rotations/Measurement = 10 , # Measurements = 4 Nmain = 3 N BLn sigBLn THspole sigTH BLn/BLN sBLn/BLN (Tm) (Tm) (deg) (deg) (%) (%) --- --------+-------- --------+-------- --------+-------- 1 0.00015 0.00000 -100.40 0.41 0.4927 0.0013 2 0.00045 0.00000 -59.15 0.05 1.4731 0.0011 3 0.03050 0.00001 30.13 0.00 100.0000 0.0563 4 0.00004 0.00000 -5.73 0.37 0.1210 0.0020 5 0.00004 0.00000 -16.97 0.15 0.1308 0.0031 6 0.00000 0.00000 5.21 7.12 0.0060 0.0010 7 0.00001 0.00000 -14.02 0.56 0.0290 0.0022 8 0.00000 0.00000 6.31 2.42 0.0119 0.0048 9 0.00010 0.00000 -9.89 0.03 0.3279 0.0032 10 0.00000 0.00000 -9.05 5.28 0.0062 0.0047 11 0.00000 0.00000 2.18 9.60 0.0031 0.0009 12 0.00000 0.00000 2.70 10.26 0.0067 0.0035 13 0.00000 0.00000 1.22 10.56 0.0035 0.0010 14 0.00000 0.00000 3.75 1.61 0.0092 0.0011 15 0.00002 0.00000 -5.74 0.09 0.0676 0.0023 16 0.00000 0.00000 -1.67 6.49 0.0051 0.0020 The magnetic center is at X = 291.0 +- 0.3 microns Y = 156.7 +- 0.5 microns The magnetic center is measured relative to the coil axis effectively at the longitudinal center of the magnet. Pitch and yaw are not seen by the coil. View from the non-lead end of the magnet: y ^ | N S S --> x N N S Date: 07-07-1995 Time: 10:00:37 Magnet Name: 133 Run Number: 1 FIELD HARMONICS Magnet Current, Imag = 200.5567 +- 2.575087E-03 A Coil Radius, Rcoil = .044882 m Coil # Turns, Nturns = 20 Average, # Rotations/Measurement = 10 , # Measurements = 4 Nmain = 3 N BLn sigBLn THspole sigTH BLn/BLN sBLn/BLN (Tm) (Tm) (deg) (deg) (%) (%) --- --------+-------- --------+-------- --------+-------- 1 0.00018 0.00000 -99.83 0.26 0.4502 0.0031 2 0.00060 0.00000 -59.21 0.08 1.4753 0.0025 3 0.04049 0.00001 30.13 0.00 100.0000 0.0264 4 0.00005 0.00000 -5.80 0.60 0.1253 0.0033 5 0.00005 0.00000 -16.92 0.36 0.1309 0.0018 6 0.00000 0.00000 7.79 2.65 0.0081 0.0009 7 0.00001 0.00000 -13.83 0.95 0.0301 0.0016 8 0.00001 0.00000 6.22 0.89 0.0176 0.0061 9 0.00013 0.00000 -9.90 0.08 0.3322 0.0011 10 0.00000 0.00000 -10.81 7.45 0.0078 0.0030 11 0.00000 0.00000 -0.28 9.77 0.0052 0.0018 12 0.00000 0.00000 -6.76 6.24 0.0051 0.0027 13 0.00000 0.00000 -8.42 5.43 0.0088 0.0024 14 0.00000 0.00000 5.80 3.91 0.0053 0.0016 15 0.00003 0.00000 -5.75 0.10 0.0714 0.0020 16 0.00000 0.00000 -3.92 6.18 0.0035 0.0017 The magnetic center is at X = 291.2 +- 0.7 microns Y = 157.5 +- 0.9 microns The magnetic center is measured relative to the coil axis effectively at the longitudinal center of the magnet. Pitch and yaw are not seen by the coil. View from the non-lead end of the magnet: y ^ | N S S --> x N N S SUMMARY OF THE CALCULATIONS AND CONVENTIONS USED Field Expansion: The expansion of the radial and azimuthal field in polar coordinates is Br(r,th) = Sum Bn (r/rref)^(n-1) cos(n(th-thspole)) Bth(r,th) = -Sum Bn (r/rref)^(n-1) sin(n(th-thspole)) Our convention is to set rref = Rcoil. Thspole is the angle of the first magnetic south pole with respect to the horizontal, measured ccw by a shaft encoder in the system. Coil Voltage: The coil voltage from each field harmonic is Vn(th) = Nturns * velocity * Brn(Rcoil,th) * L L is the magnet effective length, or BLn is the integrated field strength of the n'th harmonic. At the coil radius, the radial field as a function of angle is, Brn(Rcoil,th) * L = BLn * cos(n*(th - thspole)) The coil voltage is Vn(th) = Nturns * velocity * BLn * cos(n*(th - thspole)) = Nturns * Rcoil * ang_freq * BLn * cos(n*(th - THspole)) An FFT of the coil voltage gives Vn and PhiVn according to the formula Vn(i) = Vn * cos(n*2pi*i/N + PhiVn) Multipole Field Calculations: To find the multipole field magnitudes and phases, the measured voltage harmonics are related to their values calculated from the field harmonics: Nturns * Rcoil * ang_freq * BLn = Vn -n * thspole = PhiVn Or, BLn = Vn / (Nturns * Rcoil * ang_freq) thspole = -PhiVn / n Harmonic Strength Ratios: The main field, denoted by capital N, is the field harmonic with the largest strength at the coil radius. The field strength ratio is defined by Rn = BLn / BLN It gives the ratio of each harmonic field strength to the main field strength at the coil radius. Calculation Of SL: The sextupole strength S is defined by the vertical field on the x-axis (median plane). It is the quadratic term in the Taylor expansion. By(x) = 1/2 S x^2 On the x-axis, By(x) = Bth(r=x,th=0) From the expression for Bth above, By(x) = - B3 (x/rref)^2 sin(-3 thspole) Take rref = Rcoil, thspole = pi/6, then at x=Rcoil, By(Rcoil) = B3 = 1/2 S Rcoil^2 So, S = 2 B3 / Rcoil^2 The integrated sextupole strength is SL = 2 BL3 / Rcoil^2 Calculation Of The Sextupole Center: In the sextupole's frame, Bx' = S * x' * y' By' = 1/2 * S * (x'^2 - y'^2). In the coil's frame (unprimed frame) the magnetic center is at (x0, y0). In the coil's frame, Bx = S * (x - x0) * (y - y0) By = 1/2 * S * [(x - x0)^2 - (y - y0)^2]. The magnetic center can be found in terms of the measured quadrupole field. Compare Br and Btheta on the x-axis to Bxquad = -S * (x0 * y + y0 * x) Byquad = -S * (x0 * x - y0 * y). Evaluate at x = Rcoil, y = 0 and compare to Br(theta = 0) = Bx, Btheta(theta = 0) = By. In terms of the measured integrated strengths, this gives Xcenter = x0 = - (1/(SL * Rcoil)) * BL2 * sin(2 * THspole2) Ycenter = y0 = - (1/(SL * Rcoil)) * BL2 * cos(2 * THspole2)