SLAC Magnetic Measurements Date: 08-07-1995 Time: 09:46:11 Magnet Name (Serial #): 033 Bar Code Number: 009 Project: PEP II High Energy Ring Sextupoles Test Stand: IR8, S1, N Measurement Coil: # 1 Operator: dan Run Number: 2 Comment: run 1 power shut off Standardization Currents (A): 250.0 10.0 200.0 10.0 200.0 10.0 200.0 10.0 Test Currents (A): 25.0 50.0 100.0 125.0 150.0 175.0 200.0 150.0 100.0 50.0 25.0 Harmonics Measurements Date: 08-07-1995 Time: 10:16:46 Magnet Name: 033 Run Number: 2 FIELD HARMONICS Magnet Current, Imag = 25.60777 +- 2.633009E-03 A Coil Radius, Rcoil = .044882 m Coil # Turns, Nturns = 20 Average, # Rotations/Measurement = 10 , # Measurements = 4 Nmain = 3 N BLn sigBLn THspole sigTH BLn/BLN sBLn/BLN (Tm) (Tm) (deg) (deg) (%) (%) --- --------+-------- --------+-------- --------+-------- 1 0.00007 0.00000 -98.81 0.03 1.2746 0.0016 2 0.00008 0.00000 83.31 0.05 1.5386 0.0017 3 0.00526 0.00000 30.12 0.00 100.0000 0.0668 4 0.00000 0.00000 -3.92 0.67 0.0873 0.0075 5 0.00001 0.00000 -16.97 0.14 0.1287 0.0009 6 0.00000 0.00000 -1.05 0.87 0.0095 0.0039 7 0.00000 0.00000 -11.77 0.70 0.0427 0.0027 8 0.00000 0.00000 -2.88 0.81 0.0216 0.0018 9 0.00002 0.00000 -9.88 0.08 0.3303 0.0060 10 0.00000 0.00000 -4.27 12.10 0.0030 0.0016 11 0.00000 0.00000 -1.01 6.93 0.0040 0.0020 12 0.00000 0.00000 1.90 11.90 0.0041 0.0010 13 0.00000 0.00000 -3.14 1.97 0.0050 0.0023 14 0.00000 0.00000 -2.00 1.14 0.0081 0.0021 15 0.00000 0.00000 -5.83 0.04 0.0731 0.0022 16 0.00000 0.00000 2.23 6.62 0.0034 0.0007 The magnetic center is at X = -79.9 +- 0.6 microns Y = 335.9 +- 0.4 microns The magnetic center is measured relative to the coil axis effectively at the longitudinal center of the magnet. Pitch and yaw are not seen by the coil. View from the non-lead end of the magnet: y ^ | N S S --> x N N S Date: 08-07-1995 Time: 10:20:11 Magnet Name: 033 Run Number: 2 FIELD HARMONICS Magnet Current, Imag = 50.58712 +- 3.773379E-03 A Coil Radius, Rcoil = .044882 m Coil # Turns, Nturns = 20 Average, # Rotations/Measurement = 10 , # Measurements = 4 Nmain = 3 N BLn sigBLn THspole sigTH BLn/BLN sBLn/BLN (Tm) (Tm) (deg) (deg) (%) (%) --- --------+-------- --------+-------- --------+-------- 1 0.00008 0.00000 -97.15 0.02 0.7713 0.0008 2 0.00016 0.00000 83.50 0.01 1.5980 0.0007 3 0.01027 0.00000 30.12 0.00 100.0000 0.0318 4 0.00001 0.00000 -3.53 0.19 0.1153 0.0029 5 0.00001 0.00000 -16.89 0.08 0.1431 0.0027 6 0.00000 0.00000 -0.01 1.03 0.0076 0.0032 7 0.00000 0.00000 -12.04 0.33 0.0417 0.0013 8 0.00000 0.00000 -2.39 0.22 0.0220 0.0011 9 0.00003 0.00000 -9.92 0.03 0.3332 0.0017 10 0.00000 0.00000 0.05 11.15 0.0020 0.0010 11 0.00000 0.00000 -5.36 0.64 0.0044 0.0015 12 0.00000 0.00000 -6.44 11.50 0.0016 0.0007 13 0.00000 0.00000 -1.63 7.97 0.0028 0.0012 14 0.00000 0.00000 -2.10 0.75 0.0063 0.0018 15 0.00001 0.00000 -5.82 0.08 0.0722 0.0009 16 0.00000 0.00000 -0.51 5.87 0.0018 0.0009 The magnetic center is at X = -80.7 +- 0.2 microns Y = 349.4 +- 0.2 microns The magnetic center is measured relative to the coil axis effectively at the longitudinal center of the magnet. Pitch and yaw are not seen by the coil. View from the non-lead end of the magnet: y ^ | N S S --> x N N S Date: 08-07-1995 Time: 10:23:40 Magnet Name: 033 Run Number: 2 FIELD HARMONICS Magnet Current, Imag = 100.5875 +- 3.188416E-03 A Coil Radius, Rcoil = .044882 m Coil # Turns, Nturns = 20 Average, # Rotations/Measurement = 10 , # Measurements = 4 Nmain = 3 N BLn sigBLn THspole sigTH BLn/BLN sBLn/BLN (Tm) (Tm) (deg) (deg) (%) (%) --- --------+-------- --------+-------- --------+-------- 1 0.00011 0.00000 -95.07 0.16 0.5150 0.0005 2 0.00032 0.00000 83.51 0.01 1.5876 0.0019 3 0.02039 0.00000 30.12 0.00 100.0000 0.0120 4 0.00002 0.00000 -4.04 0.33 0.1164 0.0045 5 0.00003 0.00000 -17.06 0.03 0.1500 0.0009 6 0.00000 0.00000 -8.59 21.88 0.0031 0.0026 7 0.00001 0.00000 -11.99 0.27 0.0427 0.0007 8 0.00000 0.00000 -2.44 0.36 0.0199 0.0013 9 0.00007 0.00000 -9.85 0.03 0.3311 0.0010 10 0.00000 0.00000 -1.57 8.31 0.0024 0.0008 11 0.00000 0.00000 -3.87 4.79 0.0020 0.0012 12 0.00000 0.00000 -0.69 1.37 0.0078 0.0026 13 0.00000 0.00000 -2.17 3.21 0.0037 0.0018 14 0.00000 0.00000 -0.27 0.30 0.0090 0.0013 15 0.00001 0.00000 -5.85 0.01 0.0734 0.0010 16 0.00000 0.00000 -1.60 1.46 0.0030 0.0009 The magnetic center is at X = -80.1 +- 0.2 microns Y = 347.2 +- 0.4 microns The magnetic center is measured relative to the coil axis effectively at the longitudinal center of the magnet. Pitch and yaw are not seen by the coil. View from the non-lead end of the magnet: y ^ | N S S --> x N N S Date: 08-07-1995 Time: 10:30:23 Magnet Name: 033 Run Number: 2 FIELD HARMONICS Magnet Current, Imag = 150.5621 +- 7.016949E-03 A Coil Radius, Rcoil = .044882 m Coil # Turns, Nturns = 20 Average, # Rotations/Measurement = 10 , # Measurements = 4 Nmain = 3 N BLn sigBLn THspole sigTH BLn/BLN sBLn/BLN (Tm) (Tm) (deg) (deg) (%) (%) --- --------+-------- --------+-------- --------+-------- 1 0.00014 0.00000 -94.02 0.22 0.4431 0.0015 2 0.00048 0.00000 83.29 0.01 1.5674 0.0029 3 0.03047 0.00001 30.12 0.00 100.0000 0.0432 4 0.00003 0.00000 -3.95 0.05 0.1131 0.0028 5 0.00005 0.00000 -17.05 0.09 0.1549 0.0013 6 0.00000 0.00000 -3.09 0.47 0.0075 0.0016 7 0.00001 0.00000 -12.35 0.29 0.0422 0.0009 8 0.00001 0.00000 -2.97 0.47 0.0204 0.0017 9 0.00010 0.00000 -9.88 0.03 0.3322 0.0015 10 0.00000 0.00000 -7.49 4.77 0.0038 0.0016 11 0.00000 0.00000 -4.96 5.78 0.0022 0.0016 12 0.00000 0.00000 -12.63 1.00 0.0081 0.0016 13 0.00000 0.00000 -5.44 3.63 0.0035 0.0022 14 0.00000 0.00000 -1.25 0.93 0.0071 0.0007 15 0.00002 0.00000 -5.93 0.06 0.0689 0.0013 16 0.00000 0.00000 4.79 3.68 0.0026 0.0011 The magnetic center is at X = -81.6 +- 0.2 microns Y = 342.1 +- 0.6 microns The magnetic center is measured relative to the coil axis effectively at the longitudinal center of the magnet. Pitch and yaw are not seen by the coil. View from the non-lead end of the magnet: y ^ | N S S --> x N N S Date: 08-07-1995 Time: 10:37:06 Magnet Name: 033 Run Number: 2 FIELD HARMONICS Magnet Current, Imag = 200.5669 +- 3.816818E-03 A Coil Radius, Rcoil = .044882 m Coil # Turns, Nturns = 20 Average, # Rotations/Measurement = 10 , # Measurements = 4 Nmain = 3 N BLn sigBLn THspole sigTH BLn/BLN sBLn/BLN (Tm) (Tm) (deg) (deg) (%) (%) --- --------+-------- --------+-------- --------+-------- 1 0.00016 0.00000 -93.31 0.63 0.3882 0.0011 2 0.00063 0.00000 83.08 0.12 1.5536 0.0035 3 0.04047 0.00001 30.12 0.00 100.0000 0.0375 4 0.00004 0.00000 -4.87 1.35 0.1054 0.0012 5 0.00006 0.00000 -17.05 0.10 0.1554 0.0021 6 0.00000 0.00000 -5.54 5.47 0.0110 0.0049 7 0.00002 0.00000 -12.48 0.59 0.0407 0.0044 8 0.00001 0.00000 -3.46 0.35 0.0208 0.0023 9 0.00013 0.00000 -9.96 0.07 0.3334 0.0024 10 0.00000 0.00000 0.22 9.88 0.0038 0.0006 11 0.00000 0.00000 -2.26 10.32 0.0029 0.0015 12 0.00000 0.00000 -11.73 2.36 0.0049 0.0007 13 0.00000 0.00000 4.40 5.71 0.0030 0.0017 14 0.00000 0.00000 -1.38 4.95 0.0058 0.0008 15 0.00003 0.00000 -5.87 0.07 0.0721 0.0020 16 0.00000 0.00000 4.49 7.89 0.0043 0.0027 The magnetic center is at X = -83.4 +- 1.4 microns Y = 338.5 +- 0.8 microns The magnetic center is measured relative to the coil axis effectively at the longitudinal center of the magnet. Pitch and yaw are not seen by the coil. View from the non-lead end of the magnet: y ^ | N S S --> x N N S SUMMARY OF THE CALCULATIONS AND CONVENTIONS USED Field Expansion: The expansion of the radial and azimuthal field in polar coordinates is Br(r,th) = Sum Bn (r/rref)^(n-1) cos(n(th-thspole)) Bth(r,th) = -Sum Bn (r/rref)^(n-1) sin(n(th-thspole)) Our convention is to set rref = Rcoil. Thspole is the angle of the first magnetic south pole with respect to the horizontal, measured ccw by a shaft encoder in the system. Coil Voltage: The coil voltage from each field harmonic is Vn(th) = Nturns * velocity * Brn(Rcoil,th) * L L is the magnet effective length, or BLn is the integrated field strength of the n'th harmonic. At the coil radius, the radial field as a function of angle is, Brn(Rcoil,th) * L = BLn * cos(n*(th - thspole)) The coil voltage is Vn(th) = Nturns * velocity * BLn * cos(n*(th - thspole)) = Nturns * Rcoil * ang_freq * BLn * cos(n*(th - THspole)) An FFT of the coil voltage gives Vn and PhiVn according to the formula Vn(i) = Vn * cos(n*2pi*i/N + PhiVn) Multipole Field Calculations: To find the multipole field magnitudes and phases, the measured voltage harmonics are related to their values calculated from the field harmonics: Nturns * Rcoil * ang_freq * BLn = Vn -n * thspole = PhiVn Or, BLn = Vn / (Nturns * Rcoil * ang_freq) thspole = -PhiVn / n Harmonic Strength Ratios: The main field, denoted by capital N, is the field harmonic with the largest strength at the coil radius. The field strength ratio is defined by Rn = BLn / BLN It gives the ratio of each harmonic field strength to the main field strength at the coil radius. Calculation Of SL: The sextupole strength S is defined by the vertical field on the x-axis (median plane). It is the quadratic term in the Taylor expansion. By(x) = 1/2 S x^2 On the x-axis, By(x) = Bth(r=x,th=0) From the expression for Bth above, By(x) = - B3 (x/rref)^2 sin(-3 thspole) Take rref = Rcoil, thspole = pi/6, then at x=Rcoil, By(Rcoil) = B3 = 1/2 S Rcoil^2 So, S = 2 B3 / Rcoil^2 The integrated sextupole strength is SL = 2 BL3 / Rcoil^2 Calculation Of The Sextupole Center: In the sextupole's frame, Bx' = S * x' * y' By' = 1/2 * S * (x'^2 - y'^2). In the coil's frame (unprimed frame) the magnetic center is at (x0, y0). In the coil's frame, Bx = S * (x - x0) * (y - y0) By = 1/2 * S * [(x - x0)^2 - (y - y0)^2]. The magnetic center can be found in terms of the measured quadrupole field. Compare Br and Btheta on the x-axis to Bxquad = -S * (x0 * y + y0 * x) Byquad = -S * (x0 * x - y0 * y). Evaluate at x = Rcoil, y = 0 and compare to Br(theta = 0) = Bx, Btheta(theta = 0) = By. In terms of the measured integrated strengths, this gives Xcenter = x0 = - (1/(SL * Rcoil)) * BL2 * sin(2 * THspole2) Ycenter = y0 = - (1/(SL * Rcoil)) * BL2 * cos(2 * THspole2)