SLAC Magnetic Measurements Date: 06-28-1995 Time: 12:25:11 Magnet Name (Serial #): 000 Bar Code Number: 001 Project: PEP II High Energy Ring Sextupoles Test Stand: IR8, S1 Measurement Coil: # 1 Operator: pdr Run Number: 6 Comment: Check Repeatability Standardization Currents (A): 250.0 10.0 200.0 10.0 200.0 10.0 200.0 10.0 Test Currents (A): 25.0 50.0 100.0 150.0 200.0 150.0 100.0 50.0 25.0 Harmonics Measurements Date: 06-28-1995 Time: 12:45:18 Magnet Name: 000 Run Number: 6 FIELD HARMONICS Magnet Current, Imag = 50.56877 +- 2.11829E-03 A Coil Radius, Rcoil = .044882 m Coil # Turns, Nturns = 20 Average, # Rotations/Measurement = 10 , # Measurements = 4 Nmain = 3 N BLn sigBLn THspole sigTH BLn/BLN sBLn/BLN (Tm) (Tm) (deg) (deg) (%) (%) --- --------+-------- --------+-------- --------+-------- 1 0.00007 0.00000 -105.18 0.44 0.7134 0.0043 2 0.00009 0.00000 -50.22 0.16 0.8692 0.0066 3 0.01024 0.00002 30.09 0.00 100.0000 0.2790 4 0.00002 0.00000 -5.60 0.70 0.1830 0.0068 5 0.00001 0.00000 -19.39 3.47 0.1442 0.0254 6 0.00000 0.00000 1.78 13.15 0.0185 0.0067 7 0.00001 0.00000 -5.17 16.67 0.0493 0.0165 8 0.00000 0.00000 3.53 8.19 0.0107 0.0079 9 0.00003 0.00000 -10.02 0.12 0.3252 0.0076 10 0.00000 0.00000 -2.36 12.28 0.0141 0.0055 11 0.00000 0.00000 1.32 6.21 0.0084 0.0038 12 0.00000 0.00000 -8.05 3.63 0.0161 0.0038 13 0.00000 0.00000 -4.82 3.52 0.0087 0.0033 14 0.00000 0.00000 5.07 10.26 0.0127 0.0043 15 0.00001 0.00000 -6.12 0.70 0.0731 0.0071 16 0.00000 0.00000 3.57 5.14 0.0145 0.0065 The magnetic center is at X = 191.8 +- 1.5 microns Y = 35.4 +- 1.1 microns The magnetic center is measured relative to the coil axis effectively at the longitudinal center of the magnet. Pitch and yaw are not seen by the coil. View from the non-lead end of the magnet: y ^ | N S S --> x N N S Date: 06-28-1995 Time: 12:48:56 Magnet Name: 000 Run Number: 6 FIELD HARMONICS Magnet Current, Imag = 100.5667 +- 6.767091E-03 A Coil Radius, Rcoil = .044882 m Coil # Turns, Nturns = 20 Average, # Rotations/Measurement = 10 , # Measurements = 4 Nmain = 3 N BLn sigBLn THspole sigTH BLn/BLN sBLn/BLN (Tm) (Tm) (deg) (deg) (%) (%) --- --------+-------- --------+-------- --------+-------- 1 0.00011 0.00000 -103.11 0.52 0.5193 0.0044 2 0.00017 0.00000 -49.99 0.17 0.8500 0.0043 3 0.02037 0.00003 30.09 0.00 100.0000 0.1929 4 0.00004 0.00000 -5.22 0.24 0.1785 0.0041 5 0.00003 0.00000 -16.86 0.48 0.1538 0.0094 6 0.00000 0.00000 15.31 9.69 0.0079 0.0020 7 0.00001 0.00000 -10.93 0.82 0.0334 0.0085 8 0.00000 0.00000 10.92 1.52 0.0145 0.0063 9 0.00007 0.00000 -9.85 0.13 0.3338 0.0024 10 0.00000 0.00000 4.25 8.75 0.0100 0.0046 11 0.00000 0.00000 -4.43 5.96 0.0080 0.0006 12 0.00000 0.00000 1.98 5.36 0.0117 0.0032 13 0.00000 0.00000 -2.45 5.41 0.0079 0.0034 14 0.00000 0.00000 1.99 4.77 0.0107 0.0071 15 0.00001 0.00000 -5.70 0.23 0.0715 0.0030 16 0.00000 0.00000 1.09 4.42 0.0095 0.0016 The magnetic center is at X = 187.8 +- 1.0 microns Y = 33.1 +- 1.1 microns The magnetic center is measured relative to the coil axis effectively at the longitudinal center of the magnet. Pitch and yaw are not seen by the coil. View from the non-lead end of the magnet: y ^ | N S S --> x N N S Date: 06-28-1995 Time: 12:52:33 Magnet Name: 000 Run Number: 6 FIELD HARMONICS Magnet Current, Imag = 150.5434 +- 5.077515E-03 A Coil Radius, Rcoil = .044882 m Coil # Turns, Nturns = 20 Average, # Rotations/Measurement = 10 , # Measurements = 4 Nmain = 3 N BLn sigBLn THspole sigTH BLn/BLN sBLn/BLN (Tm) (Tm) (deg) (deg) (%) (%) --- --------+-------- --------+-------- --------+-------- 1 0.00014 0.00000 -101.39 0.38 0.4668 0.0036 2 0.00026 0.00000 -49.81 0.06 0.8469 0.0037 3 0.03046 0.00004 30.09 0.00 100.0000 0.1917 4 0.00005 0.00000 -5.27 0.58 0.1797 0.0092 5 0.00005 0.00000 -16.79 0.54 0.1615 0.0051 6 0.00000 0.00000 0.82 5.71 0.0110 0.0028 7 0.00001 0.00000 -12.42 0.96 0.0364 0.0015 8 0.00000 0.00000 7.05 2.50 0.0117 0.0026 9 0.00010 0.00000 -9.95 0.12 0.3297 0.0014 10 0.00000 0.00000 -1.49 13.77 0.0048 0.0033 11 0.00000 0.00000 6.87 4.42 0.0054 0.0008 12 0.00000 0.00000 0.15 12.14 0.0109 0.0014 13 0.00000 0.00000 0.29 2.71 0.0067 0.0013 14 0.00000 0.00000 -2.11 8.01 0.0082 0.0051 15 0.00002 0.00000 -5.83 0.08 0.0681 0.0048 16 0.00000 0.00000 -1.34 5.68 0.0071 0.0023 The magnetic center is at X = 187.4 +- 0.8 microns Y = 31.7 +- 0.4 microns The magnetic center is measured relative to the coil axis effectively at the longitudinal center of the magnet. Pitch and yaw are not seen by the coil. View from the non-lead end of the magnet: y ^ | N S S --> x N N S Date: 06-28-1995 Time: 12:56:11 Magnet Name: 000 Run Number: 6 FIELD HARMONICS Magnet Current, Imag = 200.5442 +- 2.676493E-03 A Coil Radius, Rcoil = .044882 m Coil # Turns, Nturns = 20 Average, # Rotations/Measurement = 10 , # Measurements = 4 Nmain = 3 N BLn sigBLn THspole sigTH BLn/BLN sBLn/BLN (Tm) (Tm) (deg) (deg) (%) (%) --- --------+-------- --------+-------- --------+-------- 1 0.00017 0.00000 -100.80 0.32 0.4138 0.0016 2 0.00034 0.00000 -49.62 0.08 0.8363 0.0047 3 0.04048 0.00005 30.09 0.00 100.0000 0.1779 4 0.00007 0.00000 -5.38 0.54 0.1766 0.0024 5 0.00006 0.00000 -16.78 0.68 0.1572 0.0109 6 0.00000 0.00000 -2.23 9.76 0.0119 0.0083 7 0.00001 0.00000 -12.00 1.12 0.0360 0.0082 8 0.00001 0.00000 8.63 4.59 0.0145 0.0042 9 0.00013 0.00000 -9.90 0.06 0.3323 0.0033 10 0.00000 0.00000 6.58 13.91 0.0070 0.0053 11 0.00000 0.00000 -0.11 6.07 0.0051 0.0024 12 0.00000 0.00000 5.32 9.58 0.0033 0.0024 13 0.00000 0.00000 -4.04 2.68 0.0054 0.0033 14 0.00000 0.00000 2.86 8.77 0.0052 0.0027 15 0.00003 0.00000 -5.92 0.11 0.0691 0.0014 16 0.00000 0.00000 -8.87 0.66 0.0096 0.0045 The magnetic center is at X = 185.2 +- 1.0 microns Y = 30.1 +- 0.5 microns The magnetic center is measured relative to the coil axis effectively at the longitudinal center of the magnet. Pitch and yaw are not seen by the coil. View from the non-lead end of the magnet: y ^ | N S S --> x N N S SUMMARY OF THE CALCULATIONS AND CONVENTIONS USED Field Expansion: The expansion of the radial and azimuthal field in polar coordinates is Br(r,th) = Sum Bn (r/rref)^(n-1) cos(n(th-thspole)) Bth(r,th) = -Sum Bn (r/rref)^(n-1) sin(n(th-thspole)) Our convention is to set rref = Rcoil. Thspole is the angle of the first magnetic south pole with respect to the horizontal, measured ccw by a shaft encoder in the system. Coil Voltage: The coil voltage from each field harmonic is Vn(th) = Nturns * velocity * Brn(Rcoil,th) * L L is the magnet effective length, or BLn is the integrated field strength of the n'th harmonic. At the coil radius, the radial field as a function of angle is, Brn(Rcoil,th) * L = BLn * cos(n*(th - thspole)) The coil voltage is Vn(th) = Nturns * velocity * BLn * cos(n*(th - thspole)) = Nturns * Rcoil * ang_freq * BLn * cos(n*(th - THspole)) An FFT of the coil voltage gives Vn and PhiVn according to the formula Vn(i) = Vn * cos(n*2pi*i/N + PhiVn) Multipole Field Calculations: To find the multipole field magnitudes and phases, the measured voltage harmonics are related to their values calculated from the field harmonics: Nturns * Rcoil * ang_freq * BLn = Vn -n * thspole = PhiVn Or, BLn = Vn / (Nturns * Rcoil * ang_freq) thspole = -PhiVn / n Harmonic Strength Ratios: The main field, denoted by capital N, is the field harmonic with the largest strength at the coil radius. The field strength ratio is defined by Rn = BLn / BLN It gives the ratio of each harmonic field strength to the main field strength at the coil radius. Calculation Of SL: The sextupole strength S is defined by the vertical field on the x-axis (median plane). It is the quadratic term in the Taylor expansion. By(x) = 1/2 S x^2 On the x-axis, By(x) = Bth(r=x,th=0) From the expression for Bth above, By(x) = - B3 (x/rref)^2 sin(-3 thspole) Take rref = Rcoil, thspole = pi/6, then at x=Rcoil, By(Rcoil) = B3 = 1/2 S Rcoil^2 So, S = 2 B3 / Rcoil^2 The integrated sextupole strength is SL = 2 BL3 / Rcoil^2 Calculation Of The Sextupole Center: In the sextupole's frame, Bx' = S * x' * y' By' = 1/2 * S * (x'^2 - y'^2). In the coil's frame (unprimed frame) the magnetic center is at (x0, y0). In the coil's frame, Bx = S * (x - x0) * (y - y0) By = 1/2 * S * [(x - x0)^2 - (y - y0)^2]. The magnetic center can be found in terms of the measured quadrupole field. Compare Br and Btheta on the x-axis to Bxquad = -S * (x0 * y + y0 * x) Byquad = -S * (x0 * x - y0 * y). Evaluate at x = Rcoil, y = 0 and compare to Br(theta = 0) = Bx, Btheta(theta = 0) = By. In terms of the measured integrated strengths, this gives Xcenter = x0 = - (1/(SL * Rcoil)) * BL2 * sin(2 * THspole2) Ycenter = y0 = - (1/(SL * Rcoil)) * BL2 * cos(2 * THspole2)