SLAC Magnetic Measurements
Date: 02-22-2010
Time: 10:48:43
 
Planar Insertion Device Analysis
--------------------------------

Data File Header:
SLAC Magnetic Measurements
Date: 02-22-2010
Time: 10:42:15
Project: LCLS
Device Type: Undulator
Data Type: 
Serial Number: L143-112000-20
DATASET Number: 7
Tuning Stage: Fine Tuning
Run Number: 4
Measurement Type: Z Scans
Operator: YL
Comment: find first pole position 
Session first run: 4
Measurement Device x: 
Measurement Device y: SENTRON_441
Data File: s:\magdata\LCLS\Undulator\L143-112000-20\DATASET0007\Fine Tuning\Z Scans\Run 004\bscanz.dat
Temperature (C)
L143-112000-20:--> T5 20.10 --> T2 20.12 --> T1 20.04 --> T3 20.04 --> Air 20.10 --> T4 20.10 
Axes position (m) X:0.028571 Y:0.000360
Initial Hall Probe Zero Measurements:
Vx_0i = 0.001391 V
Vy_0i = -0.001809 V
Final Hall Probe Zero Measurements:
Vx_0f = 0.001310 V
Vy_0f = -0.001849 V
Offset Correction Voff = offset+index*increment
index = 0,1...21250
Vx:offset = 0.001391 V, increment = -3.844E-09 V
Vy:offset = -0.001809 V, increment = -1.879E-09 V
Hall Probe Calibration File:
Y: c:\CVI\current_calib\Sentron_441\Sentron_441_y.ini
X: c:\cvi\current_calib\HALLx_calib_poly_fit_file.dat
Reference Magnet Measurements:
Bx_ref = 0.0000xx (T)
By_ref = 0.0000xx (T)
Magnetic Field Measurements vs Z

Analysis Parameters:
Input file directory = s:\magdata\LCLS\Undulator\L143-112000-20\DATASET0007\Fine Tuning\Z Scans\Run 004\
Input file name = x+00000_y+000_bscanz.dat
Input file type = ZVXYBXYH
Correction required = 1
Correction, Bx multiplicative factor = 1.000000 
Correction, By multiplicative factor = 1.000000 
Correction, Bx additive constant = -0.000010 T
Correction, By additive constant = -0.000008 T
Correction Bxy additive file = none
Correction Bxy additive file type = CORR_ZBXY
Electron gamma = 26629.140000
Electron energy = 13.607466 Gev
Nominal undulator period = 0.030000 m
Nominal K value = 2.253198
Nominal radiation wavelength = 7.484971e-011 m
Number of undulator poles = 226
Number of end poles (used in analysis) = 4
Cell length = 3.656000 m
Nominal phase change through cell = 709.999940 rad
Nominal phase of pole after end poles = 14.137167 rad
Save as final result = 0
Result file directory = c:\magdata\slac_und_2\
Result file name = zscan_xn0060yp0002.dat
Figures close on exit = 0
Figures visible = 1

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The Measured Fields Were Corrected:
Bx_corr = CORR_BX_MULT * Bx + CORR_BX_ADD + CORR_BX_ADD_FILE
By_corr = CORR_BY_MULT * By + CORR_BY_ADD + CORR_BY_ADD_FILE
Parameters:
CORR_BX_MULT = 1.000000 
CORR_BY_MULT = 1.000000 
CORR_BX_ADD = -0.000010 T
CORR_BY_ADD = -0.000008 T
CORR_BX_ADD_FILE = none
CORR_BY_ADD_FILE = none
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Peak And Zero Field Summary:
Number of Poles = 226
Number of End Poles (excluded in statistics) = 4
Peak Fields: Ave = 0.811126 T, RMS = 0.003256 T
Peak Field Spacing: Ave = 0.014999 m, RMS = 0.000022 m
Zero Field Spacing: Ave = 0.014999 m, RMS = 0.000039 m
Average Undulator Period = 0.029998 m

Hall Probe Overall Field Integrals:
Int Bx dz =  -8.2822e-006 Tm
Int Int Bx dz dz =  -1.2470e-005 Tm^2
Int By dz =  -2.1704e-004 Tm
Int Int By dz dz =  -6.8999e-004 Tm^2

Trajectory Exit Information:
X at exit =  -1.5202e-005 m
X slope at exit =  -4.7818e-006
Y at exit =   2.7474e-007 m
Y slope at exit =   1.8247e-007

Calculated Undulator Parameters:
Keff = 2.258049
Beff = 0.806161 T
Lambda_rad = 7.507594e-011 m

Calculated K Value At 20 C:
(Assumes Keff changes by -.05% per degree C)
Measured Average Undulator Temperature = 20.075000 C
Measured Keff = 2.258049
Calculated Keff at 20 C = 2.258134
Relative Change (Keff_20C - Keff) / Keff = 0.000037

Phase Fluctuations:
Slippage vs Z At Peaks Fitted Slope =   2.50271e-009
Undulator Period = 0.029998 m
Radiation Wavelength =   7.50759e-011 m
Phase Error (From Slippage vs Z Fit Residuals):
  Ave = 0.000000 deg, Phase error RMS = 23.763603 deg

Phase Relative To Nominal Radiation Wave:
Nominal Radiation Wavelength =   7.48497e-011 m
Cell Length = 3.656000 m
Number Of End Poles = 4
Entrance:
  Phase Error Of First 10 Poles After The End Poles
  Ave = 347.033424 deg, RMS = 8.650858 deg
Center:
  Phase Error Of All Poles In Undulator Center:
  Ave = 369.556152 deg, RMS = 41.843907 deg
Exit:
  Phase Error To Cell Boundary Of Last 10 Poles Before The End Poles
  Ave = 356.226512 deg, RMS = 17.551495 deg
Cell:
  Phase Change Of Cell =   41497.939 deg
  Nominal Phase Change Of Cell =   40680.000 deg
  Phase Error Of Cell =     817.939 deg

Calculated Phase Change In The Cell At 20 C:
(Relative to the nominal radiation wave)
(Assumes Keff changes by -.05% per degree C)
Measured Average Undulator Temperature = 20.075000 C
Measured Phase Change Of Cell =   41497.939 deg
Calculated Phase Change Of Cell At 20 C =   41500.175 deg
Phase Change Due To Temperature (Phase_20C - Phase) =       2.235 deg