SLAC Magnetic Measurements
Date: 12-14-2010
Time: 13:52:05
 
Planar Insertion Device Analysis
--------------------------------

Data File Header:
SLAC Magnetic Measurements
Date: 12-14-2010
Time: 13:46:09
Project: LCLS
Device Type: Undulator
Data Type: 
Serial Number: EPU
DATASET Number: 1
Tuning Stage: Rough Tuning
Run Number: 168
Measurement Type: Z Scans
Operator: YL
Comment: check K vs.phase; gap=25mm; Phase=0
Session first run: 160
Measurement Device x: 
Measurement Device y: SENIS_24-06
Data File: s:\magdata\LCLS\Undulator\EPU\DATASET0001\Rough Tuning\Z Scans\Run 168\bscanz.dat
Temperature (C)
Axes position (m) X:0.030473 Y:0.000589
Initial Hall Probe Zero Measurements:
Vx_0i = 0.001154 V
Vy_0i = 0.000880 V
Vz_0i = 0.000000 V
Final Hall Probe Zero Measurements:
Vx_0f = 0.001158 V
Vy_0f = 0.000883 V
Vz_0f = 0.000000 V
Offset Correction Voff = offset+index*increment
index = 0,1...20100
Vx:offset = 0.001154 V, increment = 1.940E-10 V
Vy:offset = 0.000880 V, increment = 1.252E-10 V
Vz:offset = 0.000000 V, increment = 0.000E+00 V
Hall Probe Calibration File:
Y: C:\CVI\current_calib\SENIS_24-06\SENIS_24-06_y.ini
X: c:\cvi\current_calib\HALLx_calib_poly_fit_file.dat
Z: c:\cvi\current_calib\HALLz_calib_poly_fit_file.dat
Reference Magnet Measurements:
Bx_ref = 0.0000xx (T)
By_ref = 0.0000xx (T)
Magnetic Field Measurements vs Z

Analysis Parameters:
Input file directory = S:\MagData\LCLS\Undulator\EPU\DATASET0001\Rough Tuning\Z Scans\Run 168\
Input file name = x+00000_y+000_bscanz.dat
Input file type = ZVXYBXYH
Correction required = 1
Correction, Bx multiplicative factor = 1.000000 
Correction, By multiplicative factor = 1.000000 
Correction, Bx additive constant = -0.000325 T
Correction, By additive constant = 0.000060 T
Correction Bxy additive file = none
Correction Bxy additive file type = CORR_ZBXY
Electron gamma = 26686.340000
Electron energy = 13.636695 Gev
Nominal undulator period = 0.056900 m
Nominal K value = 2.348000
Nominal radiation wavelength = 1.500699e-010 m
Number of undulator poles = 133
Number of end poles (used in analysis) = 3
Cell length = 3.698500 m
Nominal phase change through cell = 408.407045 rad
Nominal phase of pole after end poles = 6.283185 rad
Save as final result = 0
Result file directory = c:\magdata\slac_und_2\
Result file name = zscan_xn0060yp0002.dat
Figures close on exit = 0
Figures visible = 1

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The Measured Fields Were Corrected:
Bx_corr = CORR_BX_MULT * Bx + CORR_BX_ADD + CORR_BX_ADD_FILE
By_corr = CORR_BY_MULT * By + CORR_BY_ADD + CORR_BY_ADD_FILE
Parameters:
CORR_BX_MULT = 1.000000 
CORR_BY_MULT = 1.000000 
CORR_BX_ADD = -0.000325 T
CORR_BY_ADD = 0.000060 T
CORR_BX_ADD_FILE = none
CORR_BY_ADD_FILE = none
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Peak And Zero Field Summary:
Number of Poles = 133
Number of End Poles (excluded in statistics) = 3
Peak Fields: Ave = 0.445758 T, RMS = 0.001668 T
Peak Field Spacing: Ave = 0.028519 m, RMS = 0.000060 m
Zero Field Spacing: Ave = 0.028516 m, RMS = 0.000046 m
Average Undulator Period = 0.057040 m

Hall Probe Overall Field Integrals:
Int Bx dz =  -5.0820e-007 Tm
Int Int Bx dz dz =  -4.4056e-006 Tm^2
Int By dz =   2.9144e-004 Tm
Int Int By dz dz =   2.2475e-005 Tm^2

Trajectory Exit Information:
X at exit =   4.9411e-007 m
X slope at exit =   6.4070e-006
Y at exit =   9.6853e-008 m
Y slope at exit =   1.1172e-008

Calculated Undulator Parameters:
Keff = 2.378239
Beff = 0.446535 T
Lambda_rad = 1.533009e-010 m

Phase Fluctuations:
Slippage vs Z At Peaks Fitted Slope =   2.68760e-009
Undulator Period = 0.057040 m
Radiation Wavelength =   1.53301e-010 m
Phase Error (From Slippage vs Z Fit Residuals):
  Ave = 0.000000 deg, RMS = 6.832605 deg

Phase Relative To Nominal Radiation Wave:
Nominal Radiation Wavelength =   1.50070e-010 m
Cell Length = 3.698500 m
Number Of End Poles = 3
Entrance:
  Phase Error Of First 10 Poles After The End Poles
  Ave = 30.193105 deg, RMS = 16.280599 deg
Center:
  Phase Error Of All Poles In Undulator Center:
  Ave = 271.369707 deg, RMS = 142.760185 deg
Exit:
  Phase Error To Cell Boundary Of Last 10 Poles Before The End Poles
  Ave = 25.926138 deg, RMS = 13.211083 deg
Cell:
  Phase Change Of Cell =   23925.391 deg
  Nominal Phase Change Of Cell =   23400.000 deg
  Phase Error Of Cell =     525.391 deg