/*	**************************************************************	*/

/*
 * PARAM.H
 * This file contains parameters required by the measurement
 * program.
 *
 * Zachary Wolf
 * 1/29/03
 */
 
/* Protection from multiple definitions */
#ifndef __BHALLHVSZPARAM_HEADER
#define __BHALLHVSZPARAM_HEADER
 
/* GPIB addresses */
#define GPIB_BOARD_ADDR					1
#define GPIB_PT2025_ADDR				2
#define GPIB_B9900_ADDR					17
#define GPIB_GP3_ADDR					15
#define GPIB_LS450_ADDR					15
#define GPIB_LS460_ADDR					16
#define GPIB_CM2100_ADDR				01
#define GPIB_CM4000_ADDR				01
#define GPIB_MC4_ADDR					14
#define GPIB_ESP300_ADDR				21 
#define GPIB_HP3457_ADDR				22
#define GPIB_DAC488_ADDR				19
#define GPIB_DAC488HR_ADDR				8
#define GPIB_S7010_ADDR					10

/* Email Notification Settings*/
static char MAIL_TO[1000]		=		"doomspel@slac.stanford.edu";
#define MAIL_SEND_NOTIFICATION			1
#define MAIL_COMPUTER_ID				"Maglab 1"

/* RS232 addresses */
#define RS232_COM_PORT					3
#define RS232_SXDRIVE_ADDR				1



/* Hall probe measurements */
#define BHALL_BOARD_ADDR				GPIB_BOARD_ADDR
#define BHALL_B9900_ADDR				GPIB_B9900_ADDR
#define BHALL_LS460_ADDR				GPIB_LS460_ADDR
#define BHALL_GP3_ADDR					GPIB_GP3_ADDR
#define BHALL_LS450_ADDR				GPIB_LS450_ADDR
#define BHALL_S7010_ADDR				GPIB_S7010_ADDR
#define BHALL_DEVICE_TYPE				BHALL_GP3
#define BHALL_B9900_CHAN				1
#define BHALL_LS460_CHAN				'X'

/* NMR probe measurements */
#define BNMR_BOARD_ADDR					GPIB_BOARD_ADDR
#define BNMR_PT2025_ADDR				GPIB_PT2025_ADDR
#define BNMR_DEVICE_TYPE				BNMR_PT2025
#define BNMR_PT2025_CHAN				'A'
#define BNMR_PT2025_PROBE_NUM			2
#define BNMR_FIELD_DIR					'-'
#define BNMR_NOM_FIELD					.115
#define MIN_CURRENT						149

/* Move the probes */
#define MOVEXY_BOARD_ADDR				GPIB_BOARD_ADDR
#define MOVEXY_MC4_ADDR					GPIB_MC4_ADDR
#define MOVEXY_ESP300_ADDR				GPIB_ESP300_ADDR
#define MOVEXY_DEVICE_TYPE				MOVEXY_NONE_NONE
#define MOVEXY_MC4_X_AXIS				'Z'
#define MOVEXY_MC4_Y_AXIS				'X'
#define MOVEXY_ESP300_X_AXIS             2
#define MOVEXY_ESP300_Y_AXIS             1
#define MOVEXY_X_ACC						.004
#define MOVEXY_X_VEL						.0005
#define MOVEXY_X_VEL_FAST					.001
#define MOVEXY_Y_ACC						.004
#define MOVEXY_Y_VEL						.0005
#define MOVEXY_Y_VEL_FAST					.001
#define MOVEXY_BACKLASH_ON				 MOVEXY_FALSE
#define MOVEXY_BACKLASH_X_AXIS	        .0000002
#define MOVEXY_BACKLASH_Y_AXIS			.0000002
#define MOVEXY_ENCODER					MOVEXY_FALSE

/* Movement Devices */
#define MOVE_TOLERANCE_AXIS1			15.e-6
#define MOVE_TOLERANCE_AXIS2			15.e-6
#define MOVE_CORRECTION					0
#define MC4_BOX_NUM						1
//gear settings
#define MC4_NUM_STEPS_PER_REV_AXIS_W 200 //2000
#define MC4_NUM_STEPS_PER_REV_AXIS_X 2000
#define MC4_NUM_STEPS_PER_REV_AXIS_Y 2000
#define MC4_NUM_STEPS_PER_REV_AXIS_Z 2000
// screw pitch settings
#define MC4_NUM_REV_PER_METER_AXIS_W 500
#define MC4_NUM_REV_PER_METER_AXIS_X 500
#define MC4_NUM_REV_PER_METER_AXIS_Y 500
#define MC4_NUM_REV_PER_METER_AXIS_Z 500

/* Magnet current */
#define IMAG_BOARD_ADDR					GPIB_BOARD_ADDR
#define IMAG_DAC488_ADDR				GPIB_DAC488_ADDR
#define IMAG_DAC488HR_ADDR				GPIB_DAC488HR_ADDR
#define IMAG_HP3457_ADDR				GPIB_HP3457_ADDR
#define IMAG_DAC488_PORT				2
#define IMAG_DAC488HR_PORT				1
#define IMAG_HP3457_CHAN				0
#define IMAG_CONFIG						IMAG_MANUAL_HP3457
#define IMAG_BIPOLAR					IMAG_FALSE
#define IMAG_PS_AMPS_PER_DAC_VOLT		24.164
#define IMAG_TRANS_VOLTS_PER_AMP		.08
#define IMAG_RAMP_STYLE					IMAG_THREE_LINEAR
#define IMAG_MAX_CURR_LIMIT				123.
#define IMAG_MIN_CURR_LIMIT				0.
#define IMAG_RAMP_RATE				    5.0
#define IMAG_WAIT_AFTER_RAMP			1.
#define IMAG_STAND_RAMP_RATE			5.0
#define IMAG_WAIT_AFTER_STAND_RAMP		1.
#define IMAG_INIT_ZERO_CURRENT_MEAS		IMAG_FALSE
#define IMAG_INIT_TURN_ON				IMAG_FALSE
#define IMAG_CHECK_CURRENT				IMAG_FALSE 
#define IMAG_CHECK_CURRENT_TOL			0.01
#define IMAG_INIT_TURN_ON_CURRENT		20.
#define IMAG_SHOW_UI					IMAG_TRUE
#define IMAG_INVERPOWER					IMAG_FALSE
#define IMAG_CHECK_CURRENT_BALLPARK_LIM	10
#define IMAG_CHECK_CURRENT_TOL_LOWER_LIM	1
#define IMAG_HP34970_ADDR				9
#define IMAG_HP34970_CHAN				101

/* Backlash Parameters */
#define BACKLASH_INITIAL_BACKLASH_X			1
#define BACKLASH_BACKLASH_CORRECTION_X		0
#define BACKLASH_BACKLASH_AMOUNT_X			.0003
#define BACKLASH_INITIAL_BACKLASH_Y			1
#define BACKLASH_BACKLASH_CORRECTION_Y		0
#define BACKLASH_BACKLASH_AMOUNT_Y			.0003
#define BACKLASH_INITIAL_BACKLASH_Z			0
#define BACKLASH_BACKLASH_CORRECTION_Z		0
#define BACKLASH_BACKLASH_AMOUNT_Z			.0003
#define BACKLASH_ZERO_POSITION				1
	
/* Measurement parameters */
#define BHALLFLUX_TIME_TO_MEASURE_SEC		9000000
#define BHALLFLUX_TIME_BTWN_MEAS_SEC		55
#define BHALLFLUX_HALL_ZERO_POS_X			.02
#define BHALLFLUX_HALL_ZERO_POS_Y			.02
#define BHALLFLUX_HALL_PROBE_RANGE			0
#define BHALLFLUX_X_MIN						.010
#define BHALLFLUX_X_STEP					-.002
#define BHALLFLUX_NUM_X_POS					1 
#define BHALLFLUX_Y_MIN						.010
#define BHALLFLUX_Y_STEP					-.002
#define BHALLFLUX_NUM_Y_POS					1
double  BHALLFLUX_X_POS[BHALLFLUX_NUM_X_POS];											
double  BHALLFLUX_Y_POS[BHALLFLUX_NUM_Y_POS];
#define BHALLFLUX_NUM_STAND_CYCLES			0
#define BHALLFLUX_STAND_MAX					375.
#define BHALLFLUX_STAND_MIN					0.
#define BHALLFLUX_NUM_TEST_CURRENTS			1
static double  BHALLFLUX_TEST_CURRENTS[BHALLFLUX_NUM_TEST_CURRENTS] = {1};
#define BHALLVSXY_MIN_CURRENT				149.3
#define BHALLFLUX_FLUXGATE_CHANNEL			3
 
/* End protection */
#endif