/*	**************************************************************	*/

/*
 * PARAM.H
 * This file contains parameters required by the measurement
 * program.
 *
 * Zachary Wolf
 * 9/15/98
 */
 
/* Protection from multiple definitions */
#ifndef __PARAM_HEADER
#define __PARAM_HEADER
 
/* GPIB addresses */
#define GPIB_BOARD_ADDR					0
#define GPIB_K7011_ADDR					7
#define GPIB_CM2100_ADDR				1
#define GPIB_PDI5025_ADDR				13
#define GPIB_HP3457_ADDR				22
#define GPIB_DAC488_ADDR				19
#define GPIB_DAC488HR_ADDR				8
#define GPIB_VRZ404a_ADDR				29
#define GPIB_VRZ404b_ADDR				30
#define GPIB_TELETRAC_ADDR				3


/* Voltage integration system */
#define VTCOIL_BOARD_ADDR				GPIB_BOARD_ADDR
#define VTCOIL_K7011_ADDR				GPIB_K7011_ADDR
#define VTCOIL_CM2100_ADDR				GPIB_CM2100_ADDR
#define VTCOIL_PDI5025_ADDR				GPIB_PDI5025_ADDR
#define VTCOIL_CONFIG					VTCOIL_K7011_CM2100_PDI5025
#define VTCOIL_NUM_ENC_PULSE_PER_REV	1024
#define VTCOIL_NUM_SAMP_PER_REV			64
#define VTCOIL_MOTOR_ACC				2.
#define VTCOIL_MOTOR_VEL				1.
#define VTCOIL_REL_MOTOR_ROT_DIR		-1.
#define VTCOIL_SHOW_UI					VTCOIL_TRUE

/* Field Harmonics */
#define BLHAR_NUM_HAR					16
#define BLHAR_NUM_MAIN_HARMONIC			2
#define BLHAR_NUM_MEAS_AVE				4
#define BLHAR_INTEG_CHAN				'A'
#define BLHAR_NUM_REV_PER_MEAS			8
#define BLHAR_REFERENCE_RADIUS			.009760
#define BLHAR_COIL_PARAM_FILE			"..\\CoilParameters\\dc2_qbuck_param.dat"
#define BLHAR_MAGNET_VIEW				"View with main power connections to the right."
#define BLHAR_SHOW_UI					BLHAR_TRUE

/* Magnet current */
#define IMAG_BOARD_ADDR					GPIB_BOARD_ADDR
#define IMAG_DAC488_ADDR				GPIB_DAC488_ADDR
#define IMAG_DAC488HR_ADDR				GPIB_DAC488HR_ADDR
#define IMAG_HP3457_ADDR				GPIB_HP3457_ADDR
#define IMAG_DAC488_PORT				2
#define IMAG_DAC488HR_PORT				1
#define IMAG_HP3457_CHAN				0
#define IMAG_CONFIG						IMAG_DAC488_HP3457
#define IMAG_BIPOLAR					IMAG_FALSE
#define IMAG_PS_AMPS_PER_DAC_VOLT		24.164
#define IMAG_TRANS_VOLTS_PER_AMP		.08
#define IMAG_RAMP_STYLE					IMAG_THREE_LINEAR
#define IMAG_MAX_CURR_LIMIT				121.
#define IMAG_MIN_CURR_LIMIT				0.
#define IMAG_RAMP_RATE					10.0
#define IMAG_WAIT_AFTER_RAMP			0.5
#define IMAG_STAND_RAMP_RATE			20.0
#define IMAG_WAIT_AFTER_STAND_RAMP		0.5
#define IMAG_INIT_ZERO_CURRENT_MEAS		IMAG_FALSE
#define IMAG_INIT_TURN_ON				IMAG_FALSE
#define IMAG_INIT_TURN_ON_CURRENT		15.
#define IMAG_SHOW_UI					IMAG_TRUE

/* Magnet voltage measurements */
#define VMAG_BOARD_ADDR					GPIB_BOARD_ADDR
#define VMAG_HP3457_ADDR				GPIB_HP3457_ADDR
#define VMAG_K7011_ADDR					GPIB_K7011_ADDR
#define VMAG_DEVICE_TYPE				VMAG_HP3457
#define VMAG_HP3457_CHAN				1
#define VMAG_K7011_CARD_NUM				1
#define VMAG_K7011_HP3457_CHAN			1
#define VMAG_K7011_CHAN					8
#define VMAG_SHOW_UI					VMAG_FALSE

/* Temperature measurements */
#define TMAG_BOARD_ADDR					GPIB_BOARD_ADDR
#define TMAG_HP3457_ADDR				GPIB_HP3457_ADDR
#define TMAG_K7011_ADDR					GPIB_K7011_ADDR
#define TMAG_DEVICE_TYPE				TMAG_HPTHERM_HP3457
#define TMAG_K7011_CARD_NUM				1
#define TMAG_K7011_HP3457_CHAN			2
#define TMAG_SHOW_UI					TMAG_FALSE
#define TMAG_NUM_TMAG_PROBES			1
int TMAG_PROBE_CHAN_NUM[] = {2};
char TMAG_PROBE_NAME[][30] = {"Return Water Upper Right"};
#define TMAG_LOW_CURRENT_MEAS           TMAG_FALSE
#define TMAG_COILS_MEAS_NUM				4
int TMAG_PROBE_OVERTEMP_FLAG[] = {1};
double TMAG_PROBE_OVERTEMP[] = {40.0};


/* Xmag measurements */
#define XMAG_BOARD_ADDR					GPIB_BOARD_ADDR
#define XMAG_VRZ404a_ADDR				GPIB_VRZ404a_ADDR
#define XMAG_VRZ404b_ADDR				GPIB_VRZ404b_ADDR
#define XMAG_TELETRAC_ADDR				GPIB_TELETRAC_ADDR
#define XMAG_TELETRAC_AXIS				'X'
#define XMAG_DEVICE_TYPE				XMAG_NONE
#define XMAG_NUM_DEV					0
char XMAG_DEV_NAME[][40] = {"Heidenhain #0 (N) position (um)", "Heidenhain #1 (S) position (um)"};

/* Ambient measurements */
#define AMBIENT_BOARD_ADDR				GPIB_BOARD_ADDR
#define AMBIENT_HP3457_ADDR				GPIB_HP3457_ADDR
#define AMBIENT_K7011_ADDR				GPIB_K7011_ADDR
#define AMBIENT_MEAS_SYSTEM				AMBIENT_NONE
#define AMBIENT_K7011_CARD_NUM			1
#define AMBIENT_K7011_HP3457_CHAN		1
#define AMBIENT_SHOW_UI					AMBIENT_FALSE
#define AMBIENT_NUM_SENSORS				0
char AMBIENT_SENSOR_TYPE[][40] = {"AMBIENT_OMHX93AV_RH", "AMBIENT_OMHX93AV_T", "AMBIENT_OMEWSBPA_P"};
int AMBIENT_SENSOR_CHAN_NUM[] = {7, 8, 9};
char AMBIENT_SENSOR_NAME[][50] = {"Relative Humidity (%RH)", "Ambient Temperature (C)", "Barometric Pressure (inHg)"};

/* Measurement parameters */
#define COIL_NUM_STAND_CYCLES			3
#define COIL_STAND_MAX					120.
#define COIL_STAND_MIN					0.
#define COIL_NUM_TEST_CURRENTS			33
//double  COIL_TEST_CURRENTS[COIL_NUM_TEST_CURRENTS] =  {.5, 1., 1.5, 2., 2.5, 3., 3.5, 4., 4.5, 5., 5.5, 6., 6.5, 7.};
//int     COIL_MEAS_HAR_FLAGS[COIL_NUM_TEST_CURRENTS] = {1,  1,  1,   1,  1,   1,  1,   1,  1,   1,  1,   1,  1,   1};
//int     COIL_MEAS_STR_FLAGS[COIL_NUM_TEST_CURRENTS] = {0,  0,  0,   0,  0,   0,  0,   0,  0,   0,  0,   0,  0,   0}; 
double  COIL_TEST_CURRENTS[COIL_NUM_TEST_CURRENTS] =  {0., 2., 4., 6., 8., 10., 20., 30., 40., 50., 60., 70., 80., 90., 100., 110., 120., 110., 100., 90., 80., 70., 60., 50., 40., 30., 20., 10., 8., 6., 4., 2., 0.};
int     COIL_MEAS_HAR_FLAGS[COIL_NUM_TEST_CURRENTS] = {1,  1,  1,  1,  1,  1,   1,   1,   1,   1,   1,   1,   1,   1,   1,    1,    1,    1,    1,    1,   1,   1,   1,   1,   1,   1,   1,   1,   1,   1, 1,  1,  1}; 
int     COIL_MEAS_STR_FLAGS[COIL_NUM_TEST_CURRENTS] = {0,  0,  0,  0,  0,  0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0,    0,    0,    0,    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,  0,  0,  0,  0};
 															  
/* End protection */
#endif