SLAC Magnetic Measurements
Date: 09-30-1996
Time: 15:07:49

Project: PEP2HER
Magnet Type: SOLENOID
Magnet Name (Serial #): NEW
Bar Code Number: 
Test Stand: IR8
Measurement System: COIL
Operator: tss
Run Number: 3
Comment: solenoid at 600 amps, rotated 55 degrees about the horizontal axis with the top of the solenoid closest to the quad, both flux and round plate are on.

Test Currents
   600.0



             INTEGRATED GRADIENT VS CURRENT

  Imag    sigImag     GL     sigGL      GL/I   sigGL/I 
  (A)       (A)       (T)     (T)      (T/kA)   (T/kA) 
--------+--------  --------+--------  --------+--------
 599.428    5.097   0.01633  0.00013    0.0272   0.0003


           SUMMARY OF THE CALCULATIONS AND CONVENTIONS USED


Calculation Of GL:
V2 = Nturns * velocity * B2 * L
   = Nturns * Rcoil * ang_freq * GL * Rcoil
   = Nturns * Rcoil^2 * ang_freq * GL
GL = V2 / (Nturns * Rcoil^2 * ang_freq)
For a double coil (for coil bowing correction),
GL = ( (1 / Nturns * Rcoil^2)1 + (1 / Nturns * Rcoil^2)2 ) * (V2 / ang_freq)
Let CoilConst = ( (1 / Nturns * Rcoil^2)1 + (1 / Nturns * Rcoil^2)2 )
GL = CoilConst * V2 / ang_freq


Calculation Of The Harmonics:
Magnitude, harmonic n:
Vn = Nturns * velocity * Bn * L
   = Nturns * Rcoil * ang_freq * (BLn)
BLn = Vn / (Nturns * Rcoil * ang_freq)
Rn = BLn / BL2 = Vn / V2

Phase, harmonic n:
At the coil radius, the radial field as a function of angle is,
BLn(th) = BLn * cos(n*(th - THspole))
The coil voltage Vn(th) = Nturns * velocity * BLn(th)
Vn(th) = Nturns * Rcoil * ang_freq * BLn * cos(n*(th - THspole))
The FFT gives Vn and PhiVn in the formula
Vn(i) = Vn * cos(n*2pi*i/N + PhiVn)
So, Nturns * Rcoil * ang_freq * BLn = Vn
    -n * THspole = PhiVn
Or, BLn = Vn / (Nturns * Rcoil * ang_freq)
    THspole = -PhiVn / n


Calculation Of The Magnetic Center:
In the quadrupole's frame, Bx' = G * y', By' = G * x'.
In the coil's frame (unprimed frame) the magnetic center is at (x0, y0).
In the coil's frame,
     Bx = G * (y - y0), By = G * (x - x0).
This gives the magnetic center in terms of the measured
dipole field.
     x0 = - By / G, y0 = - Bx / G
In terms of the measured integrated strengths,
     Xcenter = - (1/GL) * BL1 * sin(THspole1)
     Ycenter = - (1/GL) * BL1 * cos(THspole1)