/*	**************************************************************	*/

/*
 * PARAM.H
 * This file contains parameters required by the measurement
 * program.
 *
 * Zachary Wolf
 * 12/18/00
 */
 
/* Protection from multiple definitions */
#ifndef __BHVSXYPARAM_HEADER
#define __BHVSXYPARAM_HEADER
 
/* GPIB addresses */
#define GPIB_BOARD_ADDR					0
#define GPIB_B9900_ADDR					17
#define GPIB_GP3_ADDR					17
#define GPIB_S7010_ADDR					10 
#define GPIB_LS450_ADDR					15
#define GPIB_LS460_ADDR					17
#define GPIB_MC4_ADDR					14
#define GPIB_ESP300_ADDR				21   
#define GPIB_HP3457_ADDR				22
#define GPIB_HP34970_ADDR				9
#define GPIB_DAC488_ADDR				19
#define GPIB_DAC488HR_ADDR				8

/* Email Notification Settings*/
static char MAIL_TO[1000]		=		"sda@slac.stanford.edu";
#define MAIL_SEND_NOTIFICATION			1
#define MAIL_COMPUTER_ID				"Maglab1 NLCTA Dipole"

/* Hall probe measurements */
#define BHALL_BOARD_ADDR				GPIB_BOARD_ADDR
#define BHALL_B9900_ADDR				GPIB_B9900_ADDR
#define BHALL_GP3_ADDR					GPIB_GP3_ADDR
#define BHALL_LS450_ADDR				GPIB_LS450_ADDR
#define BHALL_S7010_ADDR			    GPIB_S7010_ADDR  
#define BHALL_DEVICE_TYPE				BHALL_GP3
#define BHALL_B9900_CHAN				1
#define BHALL_LS460_ADDR				GPIB_LS460_ADDR
#define BHALL_LS460_CHAN				'Y'

/* Move the probes */
#define MOVEXY_BOARD_ADDR				GPIB_BOARD_ADDR
#define MOVEXY_MC4_ADDR					GPIB_MC4_ADDR
#define MOVEXY_ESP300_ADDR				GPIB_ESP300_ADDR
#define MOVEXY_DEVICE_TYPE				MOVEXY_ESP300_ESP300
#define MOVEXY_MC4_X_AXIS				'Z'
#define MOVEXY_MC4_Y_AXIS				'W'
#define MOVEXY_ESP300_X_AXIS             3
#define MOVEXY_ESP300_Y_AXIS             2
#define MOVEXY_X_ACC						.05
#define MOVEXY_X_VEL						.02
#define MOVEXY_Y_ACC					.1
#define MOVEXY_Y_VEL					.04
#define MOVEXY_BACKLASH_ON				 MOVEXY_FALSE
#define MOVEXY_BACKLASH_X_AXIS	        .000000
#define MOVEXY_BACKLASH_Y_AXIS			.000000
#define MOVEXY_ENCODER					MOVEXY_FALSE
#define MOVEXY_X_ACC_FAST						.05
#define MOVEXY_X_VEL_FAST						.02
#define MOVEXY_Y_ACC_FAST						.05
#define MOVEXY_Y_VEL_FAST						.05

/* Movement Devices */
#define MOVE_TOLERANCE_AXIS1			25.e-6
#define MOVE_TOLERANCE_AXIS2			25.e-6
#define MOVE_CORRECTION					1

/* Magnet current */
#define IMAG_BOARD_ADDR					GPIB_BOARD_ADDR
#define IMAG_DAC488_ADDR				GPIB_DAC488_ADDR
#define IMAG_DAC488HR_ADDR				GPIB_DAC488HR_ADDR
#define IMAG_HP3457_ADDR				GPIB_HP3457_ADDR
#define IMAG_HP34970_ADDR				GPIB_HP34970_ADDR
#define IMAG_DAC488_PORT				1
#define IMAG_DAC488HR_PORT				1
#define IMAG_HP3457_CHAN				0
#define IMAG_HP34970_CHAN				101
#define IMAG_CONFIG						IMAG_DAC488_HP34970
#define IMAG_BIPOLAR					IMAG_FALSE
#define IMAG_PS_AMPS_PER_DAC_VOLT		120. 
#define IMAG_TRANS_VOLTS_PER_AMP		.01
#define IMAG_RAMP_STYLE					IMAG_LINEAR
#define IMAG_MAX_CURR_LIMIT				601.
#define IMAG_MIN_CURR_LIMIT				0.
#define IMAG_RAMP_RATE				    8.529
#define IMAG_WAIT_AFTER_RAMP			30.
#define IMAG_STAND_RAMP_RATE			8.529
#define IMAG_WAIT_AFTER_STAND_RAMP		4.
#define IMAG_INIT_ZERO_CURRENT_MEAS		IMAG_TRUE  
#define IMAG_INIT_TURN_ON				IMAG_TRUE
#define IMAG_INIT_TURN_ON_CURRENT		20.
#define IMAG_CHECK_CURRENT				IMAG_FALSE
#define IMAG_CHECK_CURRENT_TOL			0.01
#define IMAG_SHOW_UI					IMAG_TRUE
#define IMAG_INVERPOWER					IMAG_FALSE
#define IMAG_CHECK_CURRENT_BALLPARK_LIM	5
#define IMAG_CHECK_CURRENT_TOL_LOWER_LIM 1

/* Backlash Parameters */
#define BACKLASH_INITIAL_BACKLASH_X			0
#define BACKLASH_BACKLASH_CORRECTION_X		0
#define BACKLASH_BACKLASH_AMOUNT_X			.0003
#define BACKLASH_INITIAL_BACKLASH_Y			0
#define BACKLASH_BACKLASH_CORRECTION_Y		0
#define BACKLASH_BACKLASH_AMOUNT_Y			.0003
#define BACKLASH_INITIAL_BACKLASH_Z			0
#define BACKLASH_BACKLASH_CORRECTION_Z		0
#define BACKLASH_BACKLASH_AMOUNT_Z			.0003
#define BACKLASH_ZERO_POSITION				0

/* Measurement parameters */
#define BHVSXY_HALL_ZERO_XPOS			-0.9
#define BHVSXY_HALL_ZERO_YPOS			0.0
#define BHVSXY_HALL_PROBE_RANGE			3
#define BHVSXY_X_MIN					-0.9
#define BHVSXY_X_STEP					0.02
#define BHVSXY_NUM_X_POS				46
static double BHVSXY_X_POS[BHVSXY_NUM_X_POS];
#define BHVSXY_Y_MIN					-0.04
#define BHVSXY_Y_STEP					0.01
#define BHVSXY_NUM_Y_POS				9
static double BHVSXY_Y_POS[BHVSXY_NUM_Y_POS]  ;
#define BHVSXY_NUM_STAND_CYCLES			3
#define BHVSXY_STAND_MAX				600.
#define BHVSXY_STAND_MIN				20.
#define BHVSXY_WARMUP_TIME				0
#define BHVSXY_WARMUP_CURRENT			0
#define BHVSXY_NUM_TEST_CURRENTS		1
static double  BHVSXY_TEST_CURRENTS[BHVSXY_NUM_TEST_CURRENTS] = {85.0};
 
/* End protection */
#endif