SLAC Magnetic Measurements
Date: 09-23-2008
Time: 11:54:43
 
Planar Insertion Device Analysis
--------------------------------

Data File Header:
SLAC Magnetic Measurements
Date: 09-23-2008
Time: 11:39:19
Project: LCLS
Device Type: Undulator
Data Type: 
Serial Number: L143-112000-40
DATASET Number: 1
Tuning Stage: Rough Tuning
Run Number: 51
Measurement Type: Z Scans
Operator: aw
Comment: f.p. 0.370833, x=0.026436   y=0.00023504.  Replace  x-shim. at 43 by 2-screw 0.28 in one.
Measurement Device x: 
Measurement Device y: SENIS_24-06
Data File: s:\magdata\LCLS\Undulator\L143-112000-40\DATASET0001\Rough Tuning\Z Scans\Run 051\bscanz.dat
Temperature (C)
L143-112000-40:--> top_start 20.06 --> top_mid 20.07 --> top_end 19.95 --> bot 20.05 --> granite 19.98 --> Air 19.96 
Axes position (m) X:0.026436 Y:0.000234
Initial Hall Probe Zero Measurements:
Vx_0i = -0.000340 V
Vy_0i = -0.000328 V
Final Hall Probe Zero Measurements:
Vx_0f = -0.000332 V
Vy_0f = -0.000320 V
Offset Correction Voff = offset+index*increment
index = 0,1...19850
Vx:offset = -0.000340 V, increment = 4.397E-10 V
Vy:offset = -0.000328 V, increment = 4.430E-10 V
Hall Probe Calibration File:
Y: C:\CVI\current_calib\SENIS_24-06\SENIS_24-06_y.ini
X: c:\cvi\current_calib\HALLx_calib_poly_fit_file.dat
Reference Magnet Measurements:
Bx_ref = 0.0000xx (T)
By_ref = 0.0000xx (T)
Magnetic Field Measurements vs Z

Analysis Parameters:
Input file directory = S:\MagData\LCLS\Undulator\L143-112000-40\DATASET0001\Rough Tuning\Z Scans\Run 051\
Input file name = x+00000_y+000_bscanz.dat
Input file type = ZVXYBXYH
Correction required = 1
Correction, Bx multiplicative factor = 1.000000 
Correction, By multiplicative factor = 1.000000 
Correction, Bx additive constant = 0.000015 T
Correction, By additive constant = 0.000000 T
Correction Bxy additive file = S:\Magdata\Earth Field Correction\earth_field_corr.dat
Correction Bxy additive file type = CORR_ZBXY
Electron gamma = 26658.880000
Electron energy = 13.622663 Gev
Nominal undulator period = 0.030000 m
Nominal K value = 3.492672
Nominal radiation wavelength = 1.498400e-010 m
Number of undulator poles = 226
Number of end poles (used in analysis) = 4
Cell length = 3.656000 m
Nominal phase change through cell = 709.999940 rad
Nominal phase of pole after end poles = 14.137167 rad
Save as final result = 0
Result file directory = c:\magdata\slac_und_2\
Result file name = zscan_xn0060yp0002.dat
Figures close on exit = 0
Figures visible = 1

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The Measured Fields Were Corrected:
Bx_corr = CORR_BX_MULT * Bx + CORR_BX_ADD + CORR_BX_ADD_FILE
By_corr = CORR_BY_MULT * By + CORR_BY_ADD + CORR_BY_ADD_FILE
Parameters:
CORR_BX_MULT = 1.000000 
CORR_BY_MULT = 1.000000 
CORR_BX_ADD = 0.000015 T
CORR_BY_ADD = 0.000000 T
CORR_BX_ADD_FILE = S:\Magdata\Earth Field Correction\earth_field_corr.dat
CORR_BY_ADD_FILE = S:\Magdata\Earth Field Correction\earth_field_corr.dat
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Peak And Zero Field Summary:
Number of Poles = 226
Number of End Poles (excluded in statistics) = 4
Peak Fields: Ave = 1.273802 T, RMS = 0.007390 T
Peak Field Spacing: Ave = 0.015000 m, RMS = 0.000023 m
Zero Field Spacing: Ave = 0.015000 m, RMS = 0.000046 m
Average Undulator Period = 0.029999 m

Hall Probe Overall Field Integrals:
Int Bx dz =   1.8029e-006 Tm
Int Int Bx dz dz =   1.3108e-005 Tm^2
Int By dz =   1.9235e-005 Tm
Int Int By dz dz =   2.0338e-004 Tm^2

Trajectory Exit Information:
X at exit =   4.4759e-006 m
X slope at exit =   4.2331e-007
Y at exit =  -2.8847e-007 m
Y slope at exit =  -3.9675e-008

Calculated Undulator Parameters:
Keff = 3.493161
Beff = 1.247056 T
Lambda_rad = 1.498728e-010 m

Calculated K Value At 20 C:
(Assumes Keff changes by -.05% per degree C)
Measured Average Undulator Temperature = 20.032500 C
Measured Keff = 3.493161
Calculated Keff at 20 C = 3.493217
Relative Change (Keff_20C - Keff) / Keff = 0.000016

Phase Fluctuations:
Slippage vs Z At Peaks Fitted Slope =   4.99587e-009
Undulator Period = 0.029999 m
Radiation Wavelength =   1.49873e-010 m
Phase Error (From Slippage vs Z Fit Residuals):
  Ave = -0.000000 deg, Phase error RMS = 6.265201 deg

Phase Relative To Nominal Radiation Wave:
Nominal Radiation Wavelength =   1.49840e-010 m
Cell Length = 3.656000 m
Number Of End Poles = 4
Entrance:
  Phase Error Of First 10 Poles After The End Poles
  Ave = 2.311690 deg, RMS = 4.655870 deg
Center:
  Phase Error Of All Poles In Undulator Center:
  Ave = 0.587701 deg, RMS = 6.790715 deg
Exit:
  Phase Error To Cell Boundary Of Last 10 Poles Before The End Poles
  Ave = -1.222341 deg, RMS = 4.239138 deg
Cell:
  Phase Change Of Cell =   40697.407 deg
  Nominal Phase Change Of Cell =   40680.000 deg
  Phase Error Of Cell =      17.407 deg

Calculated Phase Change In The Cell At 20 C:
(Relative to the nominal radiation wave)
(Assumes Keff changes by -.05% per degree C)
Measured Average Undulator Temperature = 20.032500 C
Measured Phase Change Of Cell =   40697.407 deg
Calculated Phase Change Of Cell At 20 C =   40698.544 deg
Phase Change Due To Temperature (Phase_20C - Phase) =       1.136 deg