SLAC Magnetic Measurements
Date: 05-18-2007
Time: 11:00:38
 
Planar Insertion Device Analysis
--------------------------------

Data File Header:
SLAC Magnetic Measurements
Date: 05-18-2007
Time: 10:53:37
Project: LCLS
Device Type: Undulator
Data Type: 
Serial Number: L143-112000-32
DATASET Number: 1
Tuning Stage: Rough Tuning
Run Number: 33
Measurement Type: Z Scans
Operator: AW
Comment: y=.000228 for y-trajectory. Now Lshim at 50, Mshim at51.
Measurement Device x: 
Measurement Device y: SENIS_24-06
Data File: s:\magdata\LCLS\Undulator\L143-112000-32\DATASET0001\Rough Tuning\Z Scans\Run 033\bscanz.dat
Temperature (C)
L143-112000-32:--> top_start 20.15 --> top_mid 20.15 --> top_end 20.07 --> bot 20.13 --> granite 20.11 --> Air 20.05 
Axes position (m) X:0.027837 Y:0.000228
Initial Hall Probe Zero Measurements:
Vx_0i = -0.000406 V
Vy_0i = -0.000487 V
Final Hall Probe Zero Measurements:
Vx_0f = -0.000353 V
Vy_0f = -0.000493 V
Offset Correction Voff = offset+index*increment
index = 0,1...19850
Vx:offset = -0.000406 V, increment = 2.666E-09 V
Vy:offset = -0.000487 V, increment = -2.955E-10 V
Hall Probe Calibration File:
Y: C:\CVI\current_calib\SENIS_24-06\SENIS_24-06_y.ini
X: c:\cvi\current_calib\HALLx_calib_poly_fit_file.dat
Reference Magnet Measurements:
Bx_ref = 0.0000xx (T)
By_ref = 0.0000xx (T)
Magnetic Field Measurements vs Z

Analysis Parameters:
Input file directory = S:\Magdata\Lcls\Undulator\L143-112000-32\DATASET0001\Rough Tuning\Z Scans\Run 033\
Input file name = x+00000_y+000_bscanz.dat
Input file type = ZVXYBXYH
Correction required = 1
Correction, Bx multiplicative factor = 1.000000 
Correction, By multiplicative factor = 1.000000 
Correction, Bx additive constant = 0.000000 T
Correction, By additive constant = 0.000000 T
Correction Bxy additive file = S:\Magdata\Earth Field Correction\earth_field_corr.dat
Correction Bxy additive file type = CORR_ZBXY
Electron gamma = 26625.060000
Electron energy = 13.605381 Gev
Nominal undulator period = 0.030000 m
Nominal K value = 3.485345
Nominal radiation wavelength = 1.496800e-010 m
Number of undulator poles = 226
Number of end poles (used in analysis) = 4
Cell length = 3.656000 m
Nominal phase change through cell = 709.999940 rad
Save as final result = 0
Result file directory = c:\magdata\slac_und_2\
Result file name = zscan_xn0060yp0002.dat
Figures close on exit = 0
Figures visible = 1

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The Measured Fields Were Corrected:
Bx_corr = CORR_BX_MULT * Bx + CORR_BX_ADD + CORR_BX_ADD_FILE
By_corr = CORR_BY_MULT * By + CORR_BY_ADD + CORR_BY_ADD_FILE
Parameters:
CORR_BX_MULT = 1.000000 
CORR_BY_MULT = 1.000000 
CORR_BX_ADD = 0.000000 T
CORR_BY_ADD = 0.000000 T
CORR_BX_ADD_FILE = S:\Magdata\Earth Field Correction\earth_field_corr.dat
CORR_BY_ADD_FILE = S:\Magdata\Earth Field Correction\earth_field_corr.dat
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Peak And Zero Field Summary:
Number of Poles = 226
Number of End Poles (excluded in statistics) = 4
Peak Fields: Ave = 1.260790 T, RMS = 0.004648 T
Peak Field Spacing: Ave = 0.014998 m, RMS = 0.000024 m
Zero Field Spacing: Ave = 0.014998 m, RMS = 0.000048 m
Average Undulator Period = 0.029997 m

Hall Probe Overall Field Integrals:
Int Bx dz =  -2.7623e-005 Tm
Int Int Bx dz dz =  -1.3830e-004 Tm^2
Int By dz =  -1.6797e-005 Tm
Int Int By dz dz =   3.7801e-005 Tm^2

Trajectory Exit Information:
X at exit =   8.3293e-007 m
X slope at exit =  -3.7012e-007
Y at exit =   3.0475e-006 m
Y slope at exit =   6.0867e-007

Calculated Undulator Parameters:
Keff = 3.457523
Beff = 1.234436 T
Lambda_rad = 1.476209e-010 m

Phase Fluctuations:
Slippage vs Z At Peaks Fitted Slope =   4.92121e-009
Undulator Period = 0.029997 m
Radiation Wavelength =   1.47621e-010 m
Phase Error (From Slippage vs Z Fit Residuals): Ave = -0.000000 deg, RMS = 18.379882 deg

Phase Relative To Nominal Radiation Wave:
Nominal Radiation Wavelength =   1.49680e-010 m
Cell Length = 3.656000 m
Number Of End Poles = 4
Phase Change Into Undulator (To Pole After End Poles) =     810.610 deg, mod_360 =      90.610 deg
Phase Change Through Undulator (Poles Between End Poles) =   38531.701 deg, mod_360 =      11.701 deg
Phase Change Out Of Undulator (To Pole Before End Poles) =     818.142 deg, mod_360 =      98.142 deg
Phase Change Of Cell =   40160.452 deg
Nominal Phase Change Of Cell =   40680.000 deg
Phase Error Of Cell =    -519.548 deg