SLAC Magnetic Measurements
Date: 04-30-2007
Time: 16:31:06
 
Planar Insertion Device Analysis
--------------------------------

Data File Header:
SLAC Magnetic Measurements
Date: 04-30-2007
Time: 16:26:55
Project: LCLS
Device Type: Undulator
Data Type: 
Serial Number: L143-112000-13
DATASET Number: 1
Tuning Stage: Fine Tuning
Run Number: 27
Measurement Type: Z Scans
Operator: YL
Comment: y-field shim adjusted #149
Measurement Device x: 
Measurement Device y: SENTRON_441
Data File: s:\magdata\LCLS\Undulator\L143-112000-13\DATASET0001\Fine Tuning\Z Scans\Run 027\bscanz.dat
Temperature (C)
L143-112000-13:--> top_end 20.01 --> top_mid 20.04 --> top_start 20.10 --> bot 20.07 --> Air 19.99 --> granite 20.01 
Axes position (m) X:0.030207 Y:0.000500
Initial Hall Probe Zero Measurements:
Vx_0i = 0.001399 V
Vy_0i = -0.000770 V
Final Hall Probe Zero Measurements:
Vx_0f = 0.001357 V
Vy_0f = -0.000734 V
Offset Correction Voff = offset+index*increment
index = 0,1...21250
Vx:offset = 0.001399 V, increment = -1.994E-09 V
Vy:offset = -0.000770 V, increment = 1.716E-09 V
Hall Probe Calibration File:
Y: c:\CVI\current_calib\Sentron_441\Sentron_441_y.ini
X: c:\cvi\current_calib\HALLx_calib_poly_fit_file.dat
Reference Magnet Measurements:
Bx_ref = 0.0000xx (T)
By_ref = 0.0000xx (T)
Magnetic Field Measurements vs Z

Analysis Parameters:
Input file directory = s:\MagData\LCLS\Undulator\L143-112000-13\DATASET0001\Fine Tuning\Z Scans\Run 027\
Input file name = x+00000_y+000_bscanz.dat
Input file type = ZVXYBXYH
Correction required = 1
Correction, Bx multiplicative factor = 1.000000 
Correction, By multiplicative factor = 1.000000 
Correction, Bx additive constant = 0.000000 T
Correction, By additive constant = -0.000009 T
Correction Bxy additive file = none
Correction Bxy additive file type = CORR_ZBXY
Electron gamma = 26686.340000
Electron energy = 13.636695 Gev
Nominal undulator period = 0.030000 m
Nominal K value = 3.498623
Nominal radiation wavelength = 1.499700e-010 m
Number of undulator poles = 226
Number of end poles (used in analysis) = 4
Cell length = 3.656000 m
Nominal phase change through cell = 709.999940 rad
Save as final result = 0
Result file directory = c:\magdata\slac_und_2\
Result file name = zscan_xn0060yp0002.dat
Figures close on exit = 0
Figures visible = 1

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The Measured Fields Were Corrected:
Bx_corr = CORR_BX_MULT * Bx + CORR_BX_ADD + CORR_BX_ADD_FILE
By_corr = CORR_BY_MULT * By + CORR_BY_ADD + CORR_BY_ADD_FILE
Parameters:
CORR_BX_MULT = 1.000000 
CORR_BY_MULT = 1.000000 
CORR_BX_ADD = 0.000000 T
CORR_BY_ADD = -0.000009 T
CORR_BX_ADD_FILE = none
CORR_BY_ADD_FILE = none
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Peak And Zero Field Summary:
Number of Poles = 226
Number of End Poles (excluded in statistics) = 4
Peak Fields: Ave = 1.276163 T, RMS = 0.006802 T
Peak Field Spacing: Ave = 0.015001 m, RMS = 0.000025 m
Zero Field Spacing: Ave = 0.015001 m, RMS = 0.000040 m
Average Undulator Period = 0.030003 m

Hall Probe Overall Field Integrals:
Int Bx dz =  -1.0791e-005 Tm
Int Int Bx dz dz =  -5.3983e-005 Tm^2
Int By dz =   1.0401e-004 Tm
Int Int By dz dz =   1.9495e-004 Tm^2

Trajectory Exit Information:
X at exit =   4.2858e-006 m
X slope at exit =   2.2865e-006
Y at exit =   1.1868e-006 m
Y slope at exit =   2.3722e-007

Calculated Undulator Parameters:
Keff = 3.498868
Beff = 1.248959 T
Lambda_rad = 1.500010e-010 m

Phase Fluctuations:
Slippage vs Z At Peaks Fitted Slope =   4.99960e-009
Undulator Period = 0.030003 m
Radiation Wavelength =   1.50001e-010 m
Phase Error (From Slippage vs Z Fit Residuals): Ave = -0.000000 deg, RMS = 4.067742 deg

Phase Relative To Nominal Radiation Wave:
Nominal Radiation Wavelength =   1.49970e-010 m
Cell Length = 3.656000 m
Number Of End Poles = 4
Phase Change Into Undulator (To Pole After End Poles) =     815.892 deg, mod_360 =      95.892 deg
Phase Change Through Undulator (Poles Between End Poles) =   39045.450 deg, mod_360 =     165.450 deg
Phase Change Out Of Undulator (To Pole Before End Poles) =     822.663 deg, mod_360 =     102.663 deg
Phase Change Of Cell =   40684.004 deg
Nominal Phase Change Of Cell =   40680.000 deg
Phase Error Of Cell =       4.004 deg