SLAC Magnetic Measurements
Date: 01-31-2008
Time: 13:18:14
 
Planar Insertion Device Analysis
--------------------------------

Data File Header:
SLAC Magnetic Measurements
Date: 01-31-2008
Time: 13:09:23
Project: LCLS
Device Type: Undulator
Data Type: 
Serial Number: L143-112000-10
DATASET Number: 1
Tuning Stage: Fine Tuning
Run Number: 7
Measurement Type: Z Scans
Operator: YL
Comment: find Y at min K; before final scans
Measurement Device x: 
Measurement Device y: SENTRON_441
Data File: s:\magdata\LCLS\Undulator\L143-112000-10\DATASET0001\Fine Tuning\Z Scans\Run 007\bscanz.dat
Temperature (C)
L143-112000-10:--> top_end 19.91 --> top_mid 19.93 --> top_start 19.95 --> bottom 19.93 --> Air 20.03 --> Granite 19.91 
Axes position (m) X:0.030310 Y:0.000465
Initial Hall Probe Zero Measurements:
Vx_0i = 0.001659 V
Vy_0i = -0.000879 V
Final Hall Probe Zero Measurements:
Vx_0f = 0.001639 V
Vy_0f = -0.000871 V
Offset Correction Voff = offset+index*increment
index = 0,1...21250
Vx:offset = 0.001659 V, increment = -9.361E-10 V
Vy:offset = -0.000879 V, increment = 3.538E-10 V
Hall Probe Calibration File:
Y: c:\CVI\current_calib\Sentron_441\Sentron_441_y.ini
X: c:\cvi\current_calib\HALLx_calib_poly_fit_file.dat
Reference Magnet Measurements:
Bx_ref = 0.0000xx (T)
By_ref = 0.0000xx (T)
Magnetic Field Measurements vs Z

Analysis Parameters:
Input file directory = S:\MagData\LCLS\Undulator\L143-112000-10\DATASET0001\Fine Tuning\Z Scans\Run 007\
Input file name = x+00000_y+100_bscanz.dat
Input file type = ZVXYBXYH
Correction required = 1
Correction, Bx multiplicative factor = 1.000000 
Correction, By multiplicative factor = 1.000000 
Correction, Bx additive constant = -0.000004 T
Correction, By additive constant = 0.000006 T
Correction Bxy additive file = none
Correction Bxy additive file type = CORR_ZBXY
Electron gamma = 26671.590000
Electron energy = 13.629158 Gev
Nominal undulator period = 0.030000 m
Nominal K value = 3.495426
Nominal radiation wavelength = 1.499001e-010 m
Number of undulator poles = 226
Number of end poles (used in analysis) = 4
Cell length = 3.656000 m
Nominal phase change through cell = 709.999940 rad
Nominal phase of pole after end poles = 14.137167 rad
Save as final result = 0
Result file directory = c:\magdata\slac_und_2\
Result file name = zscan_xn0060yp0002.dat
Figures close on exit = 0
Figures visible = 1

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The Measured Fields Were Corrected:
Bx_corr = CORR_BX_MULT * Bx + CORR_BX_ADD + CORR_BX_ADD_FILE
By_corr = CORR_BY_MULT * By + CORR_BY_ADD + CORR_BY_ADD_FILE
Parameters:
CORR_BX_MULT = 1.000000 
CORR_BY_MULT = 1.000000 
CORR_BX_ADD = -0.000004 T
CORR_BY_ADD = 0.000006 T
CORR_BX_ADD_FILE = none
CORR_BY_ADD_FILE = none
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Peak And Zero Field Summary:
Number of Poles = 226
Number of End Poles (excluded in statistics) = 4
Peak Fields: Ave = 1.274926 T, RMS = 0.006825 T
Peak Field Spacing: Ave = 0.015001 m, RMS = 0.000024 m
Zero Field Spacing: Ave = 0.015001 m, RMS = 0.000033 m
Average Undulator Period = 0.030002 m

Hall Probe Overall Field Integrals:
Int Bx dz =  -1.3799e-004 Tm
Int Int Bx dz dz =  -2.9000e-004 Tm^2
Int By dz =   7.4183e-006 Tm
Int Int By dz dz =  -1.3677e-005 Tm^2

Trajectory Exit Information:
X at exit =  -3.0084e-007 m
X slope at exit =   1.6318e-007
Y at exit =   6.3789e-006 m
Y slope at exit =   3.0353e-006

Calculated Undulator Parameters:
Keff = 3.496809
Beff = 1.248268 T
Lambda_rad = 1.500098e-010 m

Calculated K Value At 20 C:
(Assumes Keff changes by -.05% per degree C)
Measured Average Undulator Temperature = 19.930000 C
Measured Keff = 3.496809
Calculated Keff at 20 C = 3.496687
Relative Change (Keff_20C - Keff) / Keff = -0.000035

Phase Fluctuations:
Slippage vs Z At Peaks Fitted Slope =   5.00007e-009
Undulator Period = 0.030002 m
Radiation Wavelength =   1.50010e-010 m
Phase Error (From Slippage vs Z Fit Residuals):
  Ave = 0.000000 deg, RMS = 4.014975 deg

Phase Relative To Nominal Radiation Wave:
Nominal Radiation Wavelength =   1.49900e-010 m
Cell Length = 3.656000 m
Number Of End Poles = 4
Entrance:
  Phase Error Of First 10 Poles After The End Poles
  Ave = 1.751725 deg, RMS = 4.922593 deg
Center:
  Phase Error Of All Poles In Undulator Center:
  Ave = 7.667556 deg, RMS = 9.112422 deg
Exit:
  Phase Error To Cell Boundary Of Last 10 Poles Before The End Poles
  Ave = 4.170055 deg, RMS = 5.020533 deg
Cell:
  Phase Change Of Cell =   40704.107 deg
  Nominal Phase Change Of Cell =   40680.000 deg
  Phase Error Of Cell =      24.107 deg

Calculated Phase Change In The Cell At 20 C:
(Relative to the nominal radiation wave)
(Assumes Keff changes by -.05% per degree C)
Measured Average Undulator Temperature = 19.930000 C
Measured Phase Change Of Cell =   40704.107 deg
Calculated Phase Change Of Cell At 20 C =   40701.658 deg
Phase Change Due To Temperature (Phase_20C - Phase) =      -2.449 deg