LLNL Solenoid Gun Magnet
4/28/2011 Scott Anderson

This is the Compton type solenoid which is being measured for LLNL

Axial Field Probe Alignment:  x and y = 0 is the mechanical center of the inside cylinder.  
Z = 0 is the outside surface of the upstream end plate and +Z is into the magnet (see Axial Probe Setup 3.JPG where the probe is at Z = 0)
+X is to the right look in the +Z direction. 
An axial field pointed into the probe will be recorded as positive.

Transverse Field Probe Alignment:  
x and y = 0 is the mechanical center of the inside cylinder. 
Z = 0 is the outside surface of the upstream end plate and +Z is into the magnet.