Tooling Ball 1 to 2 Distance is correct 
Detector Length Diff  PD1 = -0.0004,  PD2 =  0.0002, PD3 =  0.0000, PD4 = 0.0004 

Quindos and Matlab X and Y Magnet center agree to < 1 micron 
Magnet Z Center is < 0.5 mm to Nominal value (253.1) 
            X          Y          Z        Roll     Pitch    Yaw  
          (mm)        (mm)       (mm)     (mrad)   (mrad)   (mrad)
Matlab   333.0879   262.7573   253.1000   -0.9064   -0.4716   -2.5704 
Quindos  333.0879   262.7573   253.0480   -0.0123  
Diff     -0.00002    0.00002    0.05200   

                       Centered Tooling Ball values  
                         X          Y          Z 
                       (mm)        (mm)      (mm) 
Raw Matlab           167.3022    173.0864    -0.0000 
Quad Roll Matlab     167.3658    173.0864    -0.4118 
Quad Roll Quindos    167.3658    173.0864    -0.4118 
Mechanical           167.3214    173.0424    -0.4293 

Raw To Mech Diff     -0.0192     0.0441     0.4293 
QR to Mech Diff       0.0444     0.0440     0.0175