Tooling Ball 1 to 2 Distance is correct 
Detector Length Diff  PD1 = -0.0005,  PD2 =  0.0004, PD3 = -0.0005, PD4 = 0.0000 

Quindos and Matlab X and Y Magnet center agree to < 1 micron 
Magnet Z Center is < 0.5 mm to Nominal value (253.1) 
            X          Y          Z        Roll     Pitch    Yaw  
          (mm)        (mm)       (mm)     (mrad)   (mrad)   (mrad)
Matlab   333.0879   262.7580   253.1000   -0.9169   -0.4493   -2.3418 
Quindos  333.0881   262.7580   253.3751   -0.0123  
Diff     -0.00024   -0.00005   -0.27510   

                       Centered Tooling Ball values  
                         X          Y          Z 
                       (mm)        (mm)      (mm) 
Raw Matlab           167.3001    173.0864    -0.3328 
Quad Roll Matlab     167.3638    173.0864    -0.4158 
Quad Roll Quindos    167.3638    173.0864    -0.3376 
Mechanical           167.3214    173.0424    -0.4293 

Raw To Mech Diff     -0.0213     0.0441     0.0965 
QR to Mech Diff       0.0424     0.0440     0.0135