Date: Thu, 12 Jan 2006 18:19:27 -0800 (PST)
From: Achim W. Weidemann 
To: "Spencer, Cherrill M." 
Subject: Second 2 sets of data was/Re: Here is my QE standardization plan-revised!

Hi Cherrill,
     The second two sets of measurements
can be found on the web at
http://www-group.slac.stanford.edu/met/MagMeas/MAGDATA/LCLS/quad/QE-072/
in the files ending in
.r16 (after Usual Standardization) or
.r17 (after Standardization 'B')
Details below.

Cheers, >>>Achim


Here is a recap/timeline:
--------------------------
11:49-11:56    Standardized 3x(ramp to 200A, 0A) 'Usual'
11:56          Ramp to 16A,(15.993A) wait.
12:18          Ramp to 0
12:23-12:51    Run 14: 5 measurements at 16 A   'After USUSAL Std.'

13:05-13:07    Standardized 3x(ramp to 25A, 0A) 'Standardization A'
13:07          Ramp to 16A,(15.993A) wait.
13:34          Ramp to 0
13:37-14:05    Run 15: 5 measurements at 16 A    'After Standardization A'
---------------
15:38          Standardized 3x(ramp to 200A, 0A) 'Usual'
15:46          Ramp to 35A,(35.053 A) wait
15:58          Ramp to 0
16:00-16:28    Run 16: 5 measurements at 35 A    'After USUSAL Std'

16:43          Standardized 3x(ramp to 66A, 0A)  'Standardization B'
16:46          Ramp to 35 A,(35.053 A) wait
17:06          Ramp to 0
17:11-1739     Run 17: 5 measurements at 35 A     'After Standardization B'
-----------------------------------------------------------------