Descriptions for the above files are as follows:

1.)	ASPSIMSv5Totalsta.sim

	The monument survey of 1 floor point, 2 wall points @ 2.2m & 2.5m in height.

	All observations are done with Total stations with the following sigma.
	300 microns for Distance.
	50 microns using the Function Method for Horizontal and Vertical Angles.

2.)	ASPSIMSv5Tracker.sim

	The monument survey.

	All observations are done with Trackers with the following sigma.
	75 microns for Distance.
	50 microns using the Function Method for Horizontal and Vertical Angles.

3.)	ASPSIMSv6Totalsta.sim

	The monument survey.
	The final survey of magnets in Cells 1,2,and 14 as marked in the AutoCad drawing.

	All observations are done with Total stations with the following sigma.
	300 microns for Distance.
	50 microns using the Function Method for Horizontal and Vertical Angles.

4.)	ASPSIMSv6Track_Total.sim

	The monument survey using Trackers.
	The final survey of magnets in Cells 1,2,and 14 as marked in the AutoCad drawing using Total Stations.
	
	The Total stations observations are with the following sigma.
	300 microns for Distance.
	50 microns using the Function Method for Horizontal and Vertical Angles.

	The Tracker observations are with the following sigma.
	75 microns for Distance.
	50 microns using the Function Method for Horizontal and Vertical Angles.

5.)	ASPSIMSv6Tracker.sim

	The monument survey.
	The final survey of magnets in Cells 1,2,and 14 as marked in the AutoCad drawing.

	All observations are done with Trackers with the following sigma.
	75 microns for Distance.
	50 microns using the Function Method for Horizontal and Vertical Angles.

6)	The v7 files have the same base configuration as v6, but use only two stations for component measurments.