NAME X CORR Y CORR Z CORR FLD D FLD E FLD F ----------------------------------------------------------------------------------- !--- detector coordinates relative table csy PD_TB1A(1) 380.4179 262.7464 5.8422 -0.0031 0.0018 0.0022 PD_TB2A(1) 285.6046 262.7150 5.8354 -0.0015 0.0008 0.0012 PD_TB1(2) 333.2567 310.2849 63.7922 -0.0012 0.0013 0.0010 D= min dev from best fit PD_TB2(2) 333.1465 215.2616 63.9285 -0.0011 0.0007 0.0007 E= max dev from best fit PD_TB1(3) 332.9362 310.4150 450.3347 -0.0038 0.0029 0.0030 f= sigma PD_TB2(3) 332.9393 215.2892 450.3209 -0.0006 0.0007 0.0005 PD_TB1A(4) 380.5442 262.8630 509.0297 -0.0015 0.0018 0.0016 PD_TB2A(4) 285.6499 262.9198 509.1965 -0.0016 0.0009 0.0011 !--- quad tooling ball coordinates relative table csy QUAD_TB(1) 418.7743 435.7628 291.3218 0.0008 0.0017 0.0000 QUAD_TB(2) 247.3577 435.8891 290.8882 0.0010 0.0014 0.0000 D= sigma of plane QUAD_TB(3) 247.5783 435.9546 214.7588 0.0015 0.0022 0.0000 E= sigma of cylinder QUAD_TB(4) 419.0608 435.7686 215.2100 0.0010 0.0018 0.0000 QUAD_TB(5) 500.3923 266.0360 253.4459 0.0006 0.0040 0.0000 ! --- quad tooling ball coordinates relative to wire csy with roll from quad poles QUAD_TB$QR(1) 85.5104 173.0933 37.9395 0.0008 0.0017 0.0000 QUAD_TB$QR(2) -85.9063 173.0455 37.5060 0.0010 0.0014 0.0000 QUAD_TB$QR(3) -85.6857 173.1081 -38.6235 0.0015 0.0022 0.0000 QUAD_TB$QR(4) 85.7969 173.0963 -38.1723 0.0010 0.0018 0.0000 QUAD_TB$QR(5) 167.3008 3.4480 0.0707 0.0006 0.0040 0.0000 !--- averaged location of tooling balls 1-4 in wire csy with roll to quad poles QR$Y(1234) -0.0712 173.0858 -0.3376 0.0000 0.0000 0.0000 !--- location of quad tooling balls in relation to Mechanical center (from bldg 25 CMM) QUAD$MECH(1) 85.5844 173.0692 37.7385 -0.0000 0.0000 0.0000 QUAD$MECH(2) -85.8272 173.0213 37.5197 -0.0000 0.0000 0.0000 QUAD$MECH(3) -85.7070 173.0459 -38.6053 -0.0000 0.0000 0.0000 QUAD$MECH(4) 85.7777 173.0331 -38.3703 -0.0000 0.0000 0.0000 QUAD$MECH(5) 167.3214 3.3818 -0.0630 -0.0000 0.0000 0.0000 ! --- difference in tooling ball location between wire and mech csys M_W$DIFF(1) -0.0740 0.0241 0.2011 0.0000 0.0000 0.0000 M_W$DIFF(2) -0.0791 0.0242 -0.0137 0.0000 0.0000 0.0000 M_W$DIFF(3) 0.0213 0.0622 -0.0182 0.0000 0.0000 0.0000 M_W$DIFF(4) 0.0192 0.0632 0.1980 0.0000 0.0000 0.0000 M_W$DIFF(5) -0.0206 0.0662 0.1337 0.0000 0.0000 0.0000 ! --- tooling ball coordinates relative to wire with roll to table y dir. QUAD_TB$TR(1) 85.6862 173.0064 37.9395 0.0008 0.0017 0.0000 QUAD_TB$TR(2) -85.7304 173.1327 37.5060 0.0010 0.0014 0.0000 QUAD_TB$TR(3) -85.5098 173.1950 -38.6235 0.0015 0.0022 0.0000 QUAD_TB$TR(4) 85.9727 173.0090 -38.1723 0.0010 0.0018 0.0000 QUAD_TB$TR(5) 167.3043 3.2780 0.0707 0.0006 0.0040 0.0000 !--- averaged location of tooling balls 1-4 in wire csy with roll to table y dir TR$Y(1234) 0.1047 173.0858 -0.3376 0.0000 0.0000 0.0000 ! --- center of wire csy to table QUAD$ZERO_T 333.0881 262.7580 253.3751 0.0000 0.0000 0.0000 ! --- center of mech csy to table QUAD_MECH$LOC 333.0666 262.8004 253.3813 0.0000 0.0000 0.0000 ! --- offset of ds detector to wire DS$OFFSET 0.0086 0.0204 0.0000 0.0000 0.0000 0.0000 ! --- offset of us detector to wire US$OFFSET -0.0123 0.0029 0.0000 0.0000 0.0000 0.0000 ! --- roll of quad mech csy to table (x field) QUAD$ROLL -1.0157 0.0000 0.0000 0.0000 0.0000 0.0000