//Hall Probe calibration station parameters #ifndef _PARAM_HPCS_H #define _PARAM_HPCS_H //default folder for saving log files and data #define RUN_PARAM_FOLDER "c:\\magdata" //Comunication settings //Group3 teslameter #define GP3_GPIB_BOARD 0 #define GP3_GPIB_DEV 15 //16 //HP3458 voltmeter #define HP3458_GPIB_BOARD 0 #define HP3458_GPIB_DEV 22 //HP34970 voltmeter #define HP34970_GPIB_BOARD 0 #define HP34970_GPIB_DEV 10 #define HP34970_TEMPERATURE_CH 101 //#define HP34970_TCALIB_FILE "c:\\cvi\\hpcs\\tcalib\\Tcal-035.cal" //#define HP34970_TPROBE_NAME "035" //#define HP34970_TCALIB_FILE "c:\\cvi\\hpcs\\tcalib\\Tcal-031-old.cal" #define HP34970_TCALIB_FILE "c:\\cvi\\hpcs\\tcalib\\Tcal-031.cal" #define HP34970_TPROBE_NAME "031" //FW101 NMR probe #define FW101_GPIB_BOARD 0 #define FW101_GPIB_DEV 9 #define FW101_FIELD_UNIFORMITY 0; //0 - H 1- M 2 - L #define PT2025_GPIB_BOARD 0 #define PT2025_GPIB_DEV 3 #define PT2025_NUM_READINGS_IN_B_MEAS 5 #define HP3458_GPIB_BOARD 0 #define HP3458_GPIB_DEV 22 //DANPYSIK magnet power supply settings // RS232 parameters #define MPS_SERIAL_PORT 1 // Magnet current #define MPS_MAX_CURR_LIMIT 81. //150A max #define MPS_MIN_CURR_LIMIT -81. // -150A min #define MPS_SLEW_RATE 2. //3.1 //1.550. //A/s // we take half to reduce drift #define MPS_AMP_PER_PPM 0.00016 //A per ppm // HPCS settings #define HPCS_INITIAL_RATIO 0.97 // initial set for coefficient = initial field/actual field #define HPCS_START_CUR -70. //A obsolete #define HPCS_STOP_CUR +70. //A obsolete #define HPCS_CUR_STEP 2. //16. //2. //A must be positive #define HPCS_WAIT_COUNTS 6 //3 //1 //2 #endif