Date: Thu, 2 Feb 2006 18:07:36 -0800 (PST)
From: Achim W. Weidemann <achim@slac.stanford.edu>
To: James Spencer <jus@slac.stanford.edu>
Subject: More QE-N2 Measurements


....can be found at the ususal location,

http://www-group.slac.stanford.edu/met/MagMeas/MAGDATA/E163/quad/QE-N2/

and comprise the following (all Int. Strength, no harmonics)

12:03    Standardization 3x(120A,0A)
12:11    ru8:  Main Coil at 0A, Trim Coil at (0,6,-6,+6)A
13:07    ru9:  "     "     10A,  "   "    "  "
13:32    r10:  "     "     20A,  "   "    "  "
  Notice: at above 3 runs, the trim coils had 
been hooked up as for dipole corrector, 
(not quadrupole, as previously assumed)
(Corrected AWW 03-Feb-2006 15:50)

Then between 14 and 15:00, the trim coils were correctly
connected.
15:08    Standardization 3x(120A,0A)
15:19   r11: Main Coil at   0A, Quad Trim Coil at (0,6,-6,+6)A
15:47   r12: Main Coil at  10A, Quad Trim Coil at (0,6,-6,+6)A
        (no r13)
16:29   r14: Main Coil at  20A, Quad Trim Coil at (0,6,-6,+6)A
17:15   r15: Main Coil at  60A, Quad Trim Coil at (0,6,-6,+6)A
17:31   r16: Main Coil at 100A, Quad Trim Coil at (0,6,-6,+6)A

  Let me know what else we can do for you.

                    Cheers, >>>Achim