Quadrupole Magnet Checks			60Q-102
	Date:	Magnet:	Operator(s):
	2/21/2002	60Q-102	Michael Rogers
	Notes:

Magnetic Fiducial Coordinates: (inches)
	Fiducial	Z	X	Y
	TB1	-11.3272	11.1189	16.2003
	TB2	11.3026	11.1261	16.2057
	TB3	-11.3242	-11.1556	16.2036	Offset:
	TB4	11.3032	-11.1373	16.2029	0.0000	inches
	TB5	-10.3345	-15.1987	-4.7223
	TB6	11.2030	-15.1999	-4.7195
	Description:
	Fiducial values based on the measured mechanical center line.

Quadrupole Mechanical Centerline Checks:

Mandrel Check (4 Positions):	X (in)	Y (in)
Position 1	-0.0001	0.0006
Position 2	-0.0001	0.0007
Position 3	0.0015	0.0017
Position 4	0.0013	0.0011

Mandrel Check (Position 1):	X (in)	Y (in)
Position 1 (1^st check)	-0.0002	0.0011
Position 1 (2^nd check)	-0.0002	0.0006
Position 1 (3^rd check)	-0.0003	0.0010
Position 1 (4^th check if necc)	NA	NA
Position 1 (5^th check if necc)	NA	NA

Quadrupole Gap Measurement Checks

Gap Measurements:
Upstream (in)	Downstream (in)
Loc 1: 1.024	Loc 1: 1.025
Loc 2: 1.024	Loc 2: 1.025

Approval __________________

Quadrupole Magnet Fiducialization Traveller

Approval must be obtained before removing the magnet from the test stand.

Magnetic Measurements Approval by – Jack Tanabe or Tony King.

Magnet Serial Number 60Q-102

IHEP Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

SLAC Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

Fiducialization:

Date: 2/21/2002 Ambient Temperature ______________ deg. C.

Operator(s) Michael Rogers

Comment

Fiducial – Measured Coordinates	z	x	y
	(in)	(in)	(in)
TB1	-11.3272	11.1189	16.2003
TB2	11.3026	11.1261	16.2057
TB3	-11.3242	-11.1556	16.2036
TB4	11.3032	-11.1373	16.2029
TB5	-10.3345	-15.1987	-4.7223
TB6	11.2030	-15.1999	-4.7195

(For x, y corrected coordinates, use SLAC data if available. If not, use IHEP data.)

Fiducial – Corrected Coordinates	z	x	y
	(in)	(in)	(in)
TB1
TB2
TB3
TB4
TB5
TB6

Check Measurements:

Rod	xmeasured	xnominal	ymeasured	ynominal
R1	10.5012	10.5 in	14.8050	14.8 in
R2	10.4996	10.5 in	14.8091	14.8 in
R3	-10.4995	-10.5 in	14.8075	14.8 in
R4	-10.5031	-10.5 in	14.8065	14.8 in

Cylinder at Different Positions

Position 1 (x,y)=(0,0)	x (in)	y (in)
Position 2	0.0000	0.0001
Position 3	0.0016	0.0011
Position 4	0.0014	0.0005

Approval __________________