Quadrupole Magnet Checks			50Q-078
	Date:	Magnet:	Operator(s):
	10/19/2001	50Q-078	Michael Rogers
	Notes:

Magnetic Fiducial Coordinates: (inches)
	Fiducial	Z	X	Y
	TB1	-9.4769	11.2488	16.2039
	TB2	9.4618	11.2455	16.2010
	TB3	-9.4692	-11.2474	16.2029	Offset:
	TB4	9.4732	-11.2474	16.2033	0.0000	inches
	TB5	-8.3562	-15.2005	-4.7156
	TB6	9.2290	-15.2004	-4.7168
	Description:
	Fiducial values based on the measured mechanical center line.

Quadrupole Mechanical Centerline Checks:

Mandrel Check (4 Positions):	X (in)	Y (in)
Position 1	-0.0001	0.0003
Position 2	-0.0018	0.0009
Position 3	-0.0005	0.0043
Position 4	0.0019	0.0021

Mandrel Check (Position 1):	X (in)	Y (in)
Position 1 (1^st check)	-0.0007	0.0014
Position 1 (2^nd check)	-0.0007	0.0008
Position 1 (3^rd check)	-0.0010	0.0011
Position 1 (4^th check if necc)	NA	NA
Position 1 (5^th check if necc)	NA	NA

Quadrupole Gap Measurement Checks

Gap Measurements:
Upstream (in)	Downstream (in)
Loc 1: 1.022	Loc 1: 1.022
Loc 2: 1.022	Loc 2: 1.021

Approval __________________

Quadrupole Magnet Fiducialization Traveller

Approval must be obtained before removing the magnet from the test stand.

Magnetic Measurements Approval by – Jack Tanabe or Tony King.

Magnet Serial Number 50Q-078

IHEP Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

SLAC Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

Fiducialization:

Date: 10/19/2001 Ambient Temperature ______________ deg. C.

Operator(s) Michael Rogers

Comment

Fiducial – Measured Coordinates	z	x	y
	(in)	(in)	(in)
TB1	-9.4769	11.2488	16.2039
TB2	9.4618	11.2455	16.2010
TB3	-9.4692	-11.2474	16.2029
TB4	9.4732	-11.2474	16.2033
TB5	-8.3562	-15.2005	-4.7156
TB6	9.2290	-15.2004	-4.7168

(For x, y corrected coordinates, use SLAC data if available. If not, use IHEP data.)

Fiducial – Corrected Coordinates	z	x	y
	(in)	(in)	(in)
TB1
TB2
TB3
TB4
TB5
TB6

Check Measurements:

Rod	xmeasured	xnominal	ymeasured	ynominal
R1	10.4984	10.5 in	14.8088	14.8 in
R2	10.4991	10.5 in	14.8076	14.8 in
R3	-10.5007	-10.5 in	14.8095	14.8 in
R4	-10.4998	-10.5 in	14.8121	14.8 in

Cylinder at Different Positions

Position 1 (x,y)=(0,0)	x (in)	y (in)
Position 2	-0.0017	0.0006
Position 3	-0.0004	0.0040
Position 4	0.0020	0.0017

Approval __________________