Quadrupole Magnet Checks			34Q-071
	Date:	Magnet:	Operator(s):
	8-06-01	34Q-071	Michael Rogers
	Notes:
	redid 3 piece mandrel d/s position 1 check

Magnetic Fiducial Coordinates: (inches)
	Fiducial	Z	X	Y
	TB1	-6.0908	10.8788	16.2022
	TB2	6.0935	10.8342	16.2031
	TB3	-6.0837	-10.8539	16.2073	Offset:
	TB4	6.0942	-10.8851	16.1984	0.0000	inches
	TB5	-5.2878	-15.2089	-5.0097
	TB6	4.6361	-15.2016	-4.9273
	Description:
	Fiducial values based on the measured mechanical center line.

Quadrupole Mechanical Centerline Checks:

Mandrel Check (4 Positions):	X (in)	Y (in)
Position 1	-0.0001	0.0002
Position 2	0.0004	0.0001
Position 3	0.0001	-0.0009
Position 4	-0.0007	-0.0011

Mandrel Check (Position 1):	X (in)	Y (in)
Position 1 (1^st check)	0.0003	0.0000
Position 1 (2^nd check)	-0.0003	-0.0003
Position 1 (3^rd check)	0.0039	0.0703
Position 1 (4^th check if necc)	NA	NA
Position 1 (5^th check if necc)	NA	NA

Quadrupole Gap Measurement Checks

Gap Measurements:
Upstream (in)	Downstream (in)
Loc 1: 1.023	Loc 1: 1.024
Loc 2: 1.024	Loc 2: 1.024

Approval __________________

Quadrupole Magnet Fiducialization Traveller

Approval must be obtained before removing the magnet from the test stand.

Magnetic Measurements Approval by – Jack Tanabe or Tony King.

Magnet Serial Number 34Q-071

IHEP Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

SLAC Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

Fiducialization:

Date: 8-06-01 Ambient Temperature ______________ deg. C.

Operator(s) Michael Rogers

Comment
redid 3 piece mandrel d/s position 1 check

Fiducial – Measured Coordinates	z	x	y
	(in)	(in)	(in)
TB1	-6.0908	10.8788	16.2022
TB2	6.0935	10.8342	16.2031
TB3	-6.0837	-10.8539	16.2073
TB4	6.0942	-10.8851	16.1984
TB5	-5.2878	-15.2089	-5.0097
TB6	4.6361	-15.2016	-4.9273

(For x, y corrected coordinates, use SLAC data if available. If not, use IHEP data.)

Fiducial – Corrected Coordinates	z	x	y
	(in)	(in)	(in)
TB1
TB2
TB3
TB4
TB5
TB6

Check Measurements:

Rod	xmeasured	xnominal	ymeasured	ynominal
R1	10.4992	10.5 in	14.8068	14.8 in
R2	10.4964	10.5 in	14.8090	14.8 in
R3	-10.4995	-10.5 in	14.8070	14.8 in
R4	-10.5025	-10.5 in	14.8060	14.8 in

Cylinder at Different Positions

Position 1 (x,y)=(0,0)	x (in)	y (in)
Position 2	0.0005	-0.0001
Position 3	0.0002	-0.0011
Position 4	-0.0006	-0.0013

Approval __________________