Quadrupole Magnet Checks			34Q-067
	Date:	Magnet:	Operator(s):
	7/5/2001	34Q-067	Michael Rogers
	Notes:

Magnetic Fiducial Coordinates: (inches)
	Fiducial	Z	X	Y
	TB1	-6.3176	11.2471	16.1999
	TB2	6.3139	11.2452	16.2032
	TB3	-6.3217	-11.2514	16.2022	Offset:
	TB4	6.3513	-11.2603	16.2030	0.0000	inches
	TB5	-5.1718	-15.2028	-4.7860
	TB6	4.6408	-15.2013	-4.7890
	Description:
	Fiducial values based on the measured mechanical center line.

Quadrupole Mechanical Centerline Checks:

Mandrel Check (4 Positions):	X (in)	Y (in)
Position 1	0.0001	0.0000
Position 2	0.0017	-0.0007
Position 3	0.0021	-0.0012
Position 4	0.0007	-0.0004

Mandrel Check (Position 1):	X (in)	Y (in)
Position 1 (1^st check)	0.0009	-0.0003
Position 1 (2^nd check)	0.0008	-0.0001
Position 1 (3^rd check)	0.0007	-0.0007
Position 1 (4^th check if necc)	NA	NA
Position 1 (5^th check if necc)	NA	NA

Quadrupole Gap Measurement Checks

Gap Measurements:
Upstream (in)	Downstream (in)
Loc 1: 1.023	Loc 1: 1.023
Loc 2: 1.024	Loc 2: 1.024

Approval __________________

Quadrupole Magnet Fiducialization Traveller

Approval must be obtained before removing the magnet from the test stand.

Magnetic Measurements Approval by – Jack Tanabe or Tony King.

Magnet Serial Number 34Q-067

IHEP Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

SLAC Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

Fiducialization:

Date: 7/5/2001 Ambient Temperature ______________ deg. C.

Operator(s) Michael Rogers

Comment

Fiducial – Measured Coordinates	z	x	y
	(in)	(in)	(in)
TB1	-6.3176	11.2471	16.1999
TB2	6.3139	11.2452	16.2032
TB3	-6.3217	-11.2514	16.2022
TB4	6.3513	-11.2603	16.2030
TB5	-5.1718	-15.2028	-4.7860
TB6	4.6408	-15.2013	-4.7890

(For x, y corrected coordinates, use SLAC data if available. If not, use IHEP data.)

Fiducial – Corrected Coordinates	z	x	y
	(in)	(in)	(in)
TB1
TB2
TB3
TB4
TB5
TB6

Check Measurements:

Rod	xmeasured	xnominal	ymeasured	ynominal
R1	10.4990	10.5 in	14.8063	14.8 in
R2	10.4997	10.5 in	14.8035	14.8 in
R3	-10.5017	-10.5 in	14.8053	14.8 in
R4	-10.5018	-10.5 in	14.8047	14.8 in

Cylinder at Different Positions

Position 1 (x,y)=(0,0)	x (in)	y (in)
Position 2	0.0016	-0.0007
Position 3	0.0019	-0.0012
Position 4	0.0006	-0.0003

Approval __________________