Quadrupole Magnet Checks			34Q-053
	Date:	Magnet:	Operator(s):
	2/21/2002	34Q-053	Michael Rogers
	Notes:

Magnetic Fiducial Coordinates: (inches)
	Fiducial	Z	X	Y
	TB1	-6.3086	11.2467	16.2002
	TB2	6.3275	11.2492	16.2036
	TB3	-6.3255	-11.2310	16.2041	Offset:
	TB4	6.2981	-11.2691	16.2038	0.0000	inches
	TB5	-5.2217	-15.2012	-4.7177
	TB6	4.4954	-15.2016	-4.7131
	Description:
	Fiducial values based on the measured mechanical center line.

Quadrupole Mechanical Centerline Checks:

Mandrel Check (4 Positions):	X (in)	Y (in)
Position 1	-0.0002	0.0013
Position 2	-0.0002	0.0023
Position 3	-0.0004	0.0011
Position 4	-0.0006	0.0008

Mandrel Check (Position 1):	X (in)	Y (in)
Position 1 (1^st check)	0.0005	0.0002
Position 1 (2^nd check)	0.0007	0.0000
Position 1 (3^rd check)	0.0009	0.0010
Position 1 (4^th check if necc)	NA	NA
Position 1 (5^th check if necc)	NA	NA

Quadrupole Gap Measurement Checks

Gap Measurements:
Upstream (in)	Downstream (in)
Loc 1: 1.022	Loc 1: 1.023
Loc 2: 1.022	Loc 2: 1.024

Approval __________________

Quadrupole Magnet Fiducialization Traveller

Approval must be obtained before removing the magnet from the test stand.

Magnetic Measurements Approval by – Jack Tanabe or Tony King.

Magnet Serial Number 34Q-053

IHEP Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

SLAC Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

Fiducialization:

Date: 2/21/2002 Ambient Temperature ______________ deg. C.

Operator(s) Michael Rogers

Comment

Fiducial – Measured Coordinates	z	x	y
	(in)	(in)	(in)
TB1	-6.3086	11.2467	16.2002
TB2	6.3275	11.2492	16.2036
TB3	-6.3255	-11.2310	16.2041
TB4	6.2981	-11.2691	16.2038
TB5	-5.2217	-15.2012	-4.7177
TB6	4.4954	-15.2016	-4.7131

(For x, y corrected coordinates, use SLAC data if available. If not, use IHEP data.)

Fiducial – Corrected Coordinates	z	x	y
	(in)	(in)	(in)
TB1
TB2
TB3
TB4
TB5
TB6

Check Measurements:

Rod	xmeasured	xnominal	ymeasured	ynominal
R1	10.4996	10.5 in	14.8066	14.8 in
R2	10.4973	10.5 in	14.8087	14.8 in
R3	-10.4819	-10.5 in	14.7909	14.8 in
R4	-10.5009	-10.5 in	14.8070	14.8 in

Cylinder at Different Positions

Position 1 (x,y)=(0,0)	x (in)	y (in)
Position 2	0.0000	0.0010
Position 3	-0.0002	-0.0002
Position 4	-0.0004	-0.0005

Approval __________________