Quadrupole Magnet Checks			34Q-038
	Date:	Magnet:	Operator(s):
	9/6/2001	34Q-038	Michael Rogers
	Notes:

Magnetic Fiducial Coordinates: (inches)
	Fiducial	Z	X	Y
	TB1	-6.3205	11.2399	16.2027
	TB2	6.2852	11.2263	16.2014
	TB3	-6.3021	-11.2253	16.2003	Offset:
	TB4	6.2941	-11.2202	16.1981	0.0000	inches
	TB5	-5.1780	-15.2005	-4.8241
	TB6	4.6417	-15.1976	-4.7992
	Description:
	Fiducial values based on the measured mechanical center line.

Quadrupole Mechanical Centerline Checks:

Mandrel Check (4 Positions):	X (in)	Y (in)
Position 1	-0.0002	-0.0004
Position 2	0.0006	-0.0004
Position 3	0.0006	-0.0013
Position 4	-0.0005	-0.0012

Mandrel Check (Position 1):	X (in)	Y (in)
Position 1 (1^st check)	-0.0003	-0.0003
Position 1 (2^nd check)	-0.0004	0.0023
Position 1 (3^rd check)	-0.0004	-0.0006
Position 1 (4^th check if necc)	NA	NA
Position 1 (5^th check if necc)	NA	NA

Quadrupole Gap Measurement Checks

Gap Measurements:
Upstream (in)	Downstream (in)
Loc 1: 1.023	Loc 1: 1.023
Loc 2: 1.024	Loc 2: 1.024

Approval __________________

Quadrupole Magnet Fiducialization Traveller

Approval must be obtained before removing the magnet from the test stand.

Magnetic Measurements Approval by – Jack Tanabe or Tony King.

Magnet Serial Number 34Q-038

IHEP Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

SLAC Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

Fiducialization:

Date: 9/6/2001 Ambient Temperature ______________ deg. C.

Operator(s) Michael Rogers

Comment

Fiducial – Measured Coordinates	z	x	y
	(in)	(in)	(in)
TB1	-6.3205	11.2399	16.2027
TB2	6.2852	11.2263	16.2014
TB3	-6.3021	-11.2253	16.2003
TB4	6.2941	-11.2202	16.1981
TB5	-5.1780	-15.2005	-4.8241
TB6	4.6417	-15.1976	-4.7992

(For x, y corrected coordinates, use SLAC data if available. If not, use IHEP data.)

Fiducial – Corrected Coordinates	z	x	y
	(in)	(in)	(in)
TB1
TB2
TB3
TB4
TB5
TB6

Check Measurements:

Rod	xmeasured	xnominal	ymeasured	ynominal
R1	10.4992	10.5 in	14.8065	14.8 in
R2	10.4970	10.5 in	14.8098	14.8 in
R3	-10.5014	-10.5 in	14.8078	14.8 in
R4	-10.5002	-10.5 in	14.8071	14.8 in

Cylinder at Different Positions

Position 1 (x,y)=(0,0)	x (in)	y (in)
Position 2	0.0008	0.0001
Position 3	0.0008	-0.0009
Position 4	-0.0003	-0.0008

Approval __________________