Quadrupole Magnet Checks			34Q-036
	Date:	Magnet:	Operator(s):
	9/5/2001	34Q-036	Michael Rogers
	Notes:
	Redid tip # 5 calibration.

Magnetic Fiducial Coordinates: (inches)
	Fiducial	Z	X	Y
	TB1	-6.3151	11.2141	16.1996
	TB2	6.2973	11.2521	16.2017
	TB3	-6.2974	-11.2319	16.2028	Offset:
	TB4	6.2944	-11.2355	16.1994	0.0000	inches
	TB5	-5.2285	-15.1998	-4.8170
	TB6	4.6201	-15.1996	-4.7990
	Description:
	Fiducial values based on the measured mechanical center line.

Quadrupole Mechanical Centerline Checks:

Mandrel Check (4 Positions):	X (in)	Y (in)
Position 1	0.0006	0.0000
Position 2	0.0019	-0.0003
Position 3	0.0017	-0.0009
Position 4	0.0008	-0.0006

Mandrel Check (Position 1):	X (in)	Y (in)
Position 1 (1^st check)	0.0009	-0.0015
Position 1 (2^nd check)	0.0004	-0.0017
Position 1 (3^rd check)	0.0008	-0.0013
Position 1 (4^th check if necc)	NA	NA
Position 1 (5^th check if necc)	NA	NA

Quadrupole Gap Measurement Checks

Gap Measurements:
Upstream (in)	Downstream (in)
Loc 1: 1.023	Loc 1: 1.024
Loc 2: 1.023	Loc 2: 1.024

Approval __________________

Quadrupole Magnet Fiducialization Traveller

Approval must be obtained before removing the magnet from the test stand.

Magnetic Measurements Approval by – Jack Tanabe or Tony King.

Magnet Serial Number 34Q-036

IHEP Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

SLAC Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

Fiducialization:

Date: 9/5/2001 Ambient Temperature ______________ deg. C.

Operator(s) Michael Rogers

Comment
Redid tip # 5 calibration.

Fiducial – Measured Coordinates	z	x	y
	(in)	(in)	(in)
TB1	-6.3151	11.2141	16.1996
TB2	6.2973	11.2521	16.2017
TB3	-6.2974	-11.2319	16.2028
TB4	6.2944	-11.2355	16.1994
TB5	-5.2285	-15.1998	-4.8170
TB6	4.6201	-15.1996	-4.7990

(For x, y corrected coordinates, use SLAC data if available. If not, use IHEP data.)

Fiducial – Corrected Coordinates	z	x	y
	(in)	(in)	(in)
TB1
TB2
TB3
TB4
TB5
TB6

Check Measurements:

Rod	xmeasured	xnominal	ymeasured	ynominal
R1	10.5004	10.5 in	14.8093	14.8 in
R2	10.4972	10.5 in	14.8059	14.8 in
R3	-10.4995	-10.5 in	14.8088	14.8 in
R4	-10.5009	-10.5 in	14.8052	14.8 in

Cylinder at Different Positions

Position 1 (x,y)=(0,0)	x (in)	y (in)
Position 2	0.0013	-0.0003
Position 3	0.0011	-0.0010
Position 4	0.0002	-0.0006

Approval __________________