Quadrupole Magnet Checks			34Q-035
	Date:	Magnet:	Operator(s):
	8/7/2001	34Q-035	Michael Rogers
	Notes:

Magnetic Fiducial Coordinates: (inches)
	Fiducial	Z	X	Y
	TB1	-6.1050	10.8661	16.2027
	TB2	6.0920	10.8560	16.2042
	TB3	-6.0801	-10.8584	16.2027	Offset:
	TB4	6.1049	-10.8777	16.2016	0.0000	inches
	TB5	-5.2782	-15.2138	-4.6728
	TB6	4.5545	-15.2017	-4.8304
	Description:
	Fiducial values based on the measured mechanical center line.

Quadrupole Mechanical Centerline Checks:

Mandrel Check (4 Positions):	X (in)	Y (in)
Position 1	0.0001	0.0003
Position 2	-0.0001	0.0011
Position 3	-0.0002	0.0005
Position 4	0.0001	-0.0008

Mandrel Check (Position 1):	X (in)	Y (in)
Position 1 (1^st check)	0.0010	0.0005
Position 1 (2^nd check)	0.0008	-0.0002
Position 1 (3^rd check)	0.0002	0.0009
Position 1 (4^th check if necc)	NA	NA
Position 1 (5^th check if necc)	NA	NA

Quadrupole Gap Measurement Checks

Gap Measurements:
Upstream (in)	Downstream (in)
Loc 1: 1.023	Loc 1: 1.023
Loc 2: 1.023	Loc 2: 1.023

Approval __________________

Quadrupole Magnet Fiducialization Traveller

Approval must be obtained before removing the magnet from the test stand.

Magnetic Measurements Approval by – Jack Tanabe or Tony King.

Magnet Serial Number 34Q-035

IHEP Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

SLAC Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

Fiducialization:

Date: 8/7/2001 Ambient Temperature ______________ deg. C.

Operator(s) Michael Rogers

Comment

Fiducial – Measured Coordinates	z	x	y
	(in)	(in)	(in)
TB1	-6.1050	10.8661	16.2027
TB2	6.0920	10.8560	16.2042
TB3	-6.0801	-10.8584	16.2027
TB4	6.1049	-10.8777	16.2016
TB5	-5.2782	-15.2138	-4.6728
TB6	4.5545	-15.2017	-4.8304

(For x, y corrected coordinates, use SLAC data if available. If not, use IHEP data.)

Fiducial – Corrected Coordinates	z	x	y
	(in)	(in)	(in)
TB1
TB2
TB3
TB4
TB5
TB6

Check Measurements:

Rod	xmeasured	xnominal	ymeasured	ynominal
R1	10.4987	10.5 in	14.8077	14.8 in
R2	10.4978	10.5 in	14.8107	14.8 in
R3	-10.4999	-10.5 in	14.8072	14.8 in
R4	-10.5004	-10.5 in	14.8079	14.8 in

Cylinder at Different Positions

Position 1 (x,y)=(0,0)	x (in)	y (in)
Position 2	-0.0002	0.0008
Position 3	-0.0002	0.0002
Position 4	0.0000	-0.0010

Approval __________________