Quadrupole Magnet Checks			34Q-033
	Date:	Magnet:	Operator(s):
	8/7/2001	34Q-033	Michael Rogers
	Notes:
	Redid probe 5 check.

Magnetic Fiducial Coordinates: (inches)
	Fiducial	Z	X	Y
	TB1	-6.3207	11.2635	16.2005
	TB2	6.3219	11.2466	16.1998
	TB3	-6.3202	-11.2541	16.2018	Offset:
	TB4	6.3372	-11.2432	16.2024	0.0000	inches
	TB5	-5.2680	-15.2029	-4.7231
	TB6	4.6013	-15.2079	-4.7285
	Description:
	Fiducial values based on the measured mechanical center line.

Quadrupole Mechanical Centerline Checks:

Mandrel Check (4 Positions):	X (in)	Y (in)
Position 1	0.0000	-0.0002
Position 2	0.0013	-0.0005
Position 3	0.0007	-0.0014
Position 4	-0.0004	-0.0010

Mandrel Check (Position 1):	X (in)	Y (in)
Position 1 (1^st check)	0.0005	-0.0020
Position 1 (2^nd check)	0.0008	0.0000
Position 1 (3^rd check)	0.0001	0.0003
Position 1 (4^th check if necc)	NA	NA
Position 1 (5^th check if necc)	NA	NA

Quadrupole Gap Measurement Checks

Gap Measurements:
Upstream (in)	Downstream (in)
Loc 1: 1.024	Loc 1: 1.023
Loc 2: 1.024	Loc 2: 1.024

Approval __________________

Quadrupole Magnet Fiducialization Traveller

Approval must be obtained before removing the magnet from the test stand.

Magnetic Measurements Approval by – Jack Tanabe or Tony King.

Magnet Serial Number 34Q-033

IHEP Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

SLAC Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

Fiducialization:

Date: 8/7/2001 Ambient Temperature ______________ deg. C.

Operator(s) Michael Rogers

Comment
Redid probe 5 check.

Fiducial – Measured Coordinates	z	x	y
	(in)	(in)	(in)
TB1	-6.3207	11.2635	16.2005
TB2	6.3219	11.2466	16.1998
TB3	-6.3202	-11.2541	16.2018
TB4	6.3372	-11.2432	16.2024
TB5	-5.2680	-15.2029	-4.7231
TB6	4.6013	-15.2079	-4.7285

(For x, y corrected coordinates, use SLAC data if available. If not, use IHEP data.)

Fiducial – Corrected Coordinates	z	x	y
	(in)	(in)	(in)
TB1
TB2
TB3
TB4
TB5
TB6

Check Measurements:

Rod	xmeasured	xnominal	ymeasured	ynominal
R1	10.4986	10.5 in	14.8096	14.8 in
R2	10.4995	10.5 in	14.8088	14.8 in
R3	-10.5006	-10.5 in	14.8077	14.8 in
R4	-10.5001	-10.5 in	14.8077	14.8 in

Cylinder at Different Positions

Position 1 (x,y)=(0,0)	x (in)	y (in)
Position 2	0.0013	-0.0004
Position 3	0.0007	-0.0012
Position 4	-0.0004	-0.0008

Approval __________________