Quadrupole Magnet Checks			15Q-030
	Date:	Magnet:	Operator(s):
	9/5/2001	15Q-030	Michael Rogers
	Notes:
	Redid VG # 1.

Magnetic Fiducial Coordinates: (inches)
	Fiducial	Z	X	Y
	TB1	-2.5627	11.2258	16.1975
	TB2	2.5604	11.2361	16.1991
	TB3	-2.5600	-11.2288	16.1966	Offset:
	TB4	2.5707	-11.2527	16.1981	0.0000	inches
	TB5	-1.4653	-15.1984	-4.8201
	TB6	2.4407	-15.1993	-4.8547
	Description:
	Fiducial values based on the measured mechanical center line.

Quadrupole Mechanical Centerline Checks:

Mandrel Check (4 Positions):	X (in)	Y (in)
Position 1	0.0000	-0.0004
Position 2	0.0028	-0.0017
Position 3	0.0017	-0.0037
Position 4	-0.0002	-0.0029

Mandrel Check (Position 1):	X (in)	Y (in)
Position 1 (1^st check)	0.0010	-0.0021
Position 1 (2^nd check)	0.0010	-0.0019
Position 1 (3^rd check)	0.0011	-0.0018
Position 1 (4^th check if necc)	NA	NA
Position 1 (5^th check if necc)	NA	NA

Quadrupole Gap Measurement Checks

Gap Measurements:
Upstream (in)	Downstream (in)
Loc 1: 1.023	Loc 1: 1.024
Loc 2: 1.023	Loc 2: 1.023

Approval __________________

Quadrupole Magnet Fiducialization Traveller

Approval must be obtained before removing the magnet from the test stand.

Magnetic Measurements Approval by – Jack Tanabe or Tony King.

Magnet Serial Number 15Q-030

IHEP Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

SLAC Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

Fiducialization:

Date: 9/5/2001 Ambient Temperature ______________ deg. C.

Operator(s) Michael Rogers

Comment
Redid VG # 1.

Fiducial – Measured Coordinates	z	x	y
	(in)	(in)	(in)
TB1	-2.5627	11.2258	16.1975
TB2	2.5604	11.2361	16.1991
TB3	-2.5600	-11.2288	16.1966
TB4	2.5707	-11.2527	16.1981
TB5	-1.4653	-15.1984	-4.8201
TB6	2.4407	-15.1993	-4.8547

(For x, y corrected coordinates, use SLAC data if available. If not, use IHEP data.)

Fiducial – Corrected Coordinates	z	x	y
	(in)	(in)	(in)
TB1
TB2
TB3
TB4
TB5
TB6

Check Measurements:

Rod	xmeasured	xnominal	ymeasured	ynominal
R1	10.5015	10.5 in	14.8077	14.8 in
R2	10.4982	10.5 in	14.8047	14.8 in
R3	-10.5018	-10.5 in	14.8051	14.8 in
R4	-10.5021	-10.5 in	14.8039	14.8 in

Cylinder at Different Positions

Position 1 (x,y)=(0,0)	x (in)	y (in)
Position 2	0.0027	-0.0014
Position 3	0.0017	-0.0033
Position 4	-0.0003	-0.0026

Approval __________________