Quadrupole Magnet Checks			15Q-018
	Date:	Magnet:	Operator(s):
	8/7/2001	15Q-018	Michael Rogers
	Notes:

Magnetic Fiducial Coordinates: (inches)
	Fiducial	Z	X	Y
	TB1	-2.5816	11.2648	16.1975
	TB2	2.6218	11.2547	16.2033
	TB3	-2.5595	-11.2219	16.2068	Offset:
	TB4	2.5934	-11.2452	16.1998	0.0000	inches
	TB5	-1.5000	-15.2014	-4.8227
	TB6	2.4606	-15.2006	-4.7898
	Description:
	Fiducial values based on the measured mechanical center line.

Quadrupole Mechanical Centerline Checks:

Mandrel Check (4 Positions):	X (in)	Y (in)
Position 1	-0.0002	0.0006
Position 2	0.0019	-0.0006
Position 3	0.0011	-0.0028
Position 4	-0.0009	-0.0017

Mandrel Check (Position 1):	X (in)	Y (in)
Position 1 (1^st check)	0.0009	-0.0017
Position 1 (2^nd check)	0.0008	-0.0011
Position 1 (3^rd check)	0.0005	-0.0008
Position 1 (4^th check if necc)	NA	NA
Position 1 (5^th check if necc)	NA	NA

Quadrupole Gap Measurement Checks

Gap Measurements:
Upstream (in)	Downstream (in)
Loc 1: 1.022	Loc 1: 1.022
Loc 2: 1.022	Loc 2: 1.023

Approval __________________

Quadrupole Magnet Fiducialization Traveller

Approval must be obtained before removing the magnet from the test stand.

Magnetic Measurements Approval by – Jack Tanabe or Tony King.

Magnet Serial Number 15Q-018

IHEP Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

SLAC Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

Fiducialization:

Date: 8/7/2001 Ambient Temperature ______________ deg. C.

Operator(s) Michael Rogers

Comment

Fiducial – Measured Coordinates	z	x	y
	(in)	(in)	(in)
TB1	-2.5816	11.2648	16.1975
TB2	2.6218	11.2547	16.2033
TB3	-2.5595	-11.2219	16.2068
TB4	2.5934	-11.2452	16.1998
TB5	-1.5000	-15.2014	-4.8227
TB6	2.4606	-15.2006	-4.7898

(For x, y corrected coordinates, use SLAC data if available. If not, use IHEP data.)

Fiducial – Corrected Coordinates	z	x	y
	(in)	(in)	(in)
TB1
TB2
TB3
TB4
TB5
TB6

Check Measurements:

Rod	xmeasured	xnominal	ymeasured	ynominal
R1	10.5003	10.5 in	14.8076	14.8 in
R2	10.5002	10.5 in	14.8085	14.8 in
R3	-10.4982	-10.5 in	14.8084	14.8 in
R4	-10.4981	-10.5 in	14.8083	14.8 in

Cylinder at Different Positions

Position 1 (x,y)=(0,0)	x (in)	y (in)
Position 2	0.0021	-0.0012
Position 3	0.0013	-0.0035
Position 4	-0.0007	-0.0024

Approval __________________