Quadrupole Magnet Checks			15Q-017
	Date:	Magnet:	Operator(s):
	8/7/2001	15Q-017	Michael Rogers
	Notes:
	Redid 3 piece mandrel U/S position 1 check.

Magnetic Fiducial Coordinates: (inches)
	Fiducial	Z	X	Y
	TB1	-2.6216	11.2302	16.2071
	TB2	2.5842	11.2576	16.1982
	TB3	-2.5824	-11.2468	16.2010	Offset:
	TB4	2.5867	-11.2519	16.1983	0.0000	inches
	TB5	-1.5330	-15.2008	-4.8245
	TB6	2.3855	-15.2005	-4.7799
	Description:
	Fiducial values based on the measured mechanical center line.

Quadrupole Mechanical Centerline Checks:

Mandrel Check (4 Positions):	X (in)	Y (in)
Position 1	-0.0001	-0.0001
Position 2	0.0022	-0.0006
Position 3	0.0020	-0.0021
Position 4	-0.0006	-0.0015

Mandrel Check (Position 1):	X (in)	Y (in)
Position 1 (1^st check)	0.0029	-0.0056
Position 1 (2^nd check)	-0.0299	0.0783
Position 1 (3^rd check)	0.0003	0.0001
Position 1 (4^th check if necc)	NA	NA
Position 1 (5^th check if necc)	NA	NA

Quadrupole Gap Measurement Checks

Gap Measurements:
Upstream (in)	Downstream (in)
Loc 1: 1.022	Loc 1: 1.023
Loc 2: 1.023	Loc 2: 1.023

Approval __________________

Quadrupole Magnet Fiducialization Traveller

Approval must be obtained before removing the magnet from the test stand.

Magnetic Measurements Approval by – Jack Tanabe or Tony King.

Magnet Serial Number 15Q-017

IHEP Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

SLAC Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

Fiducialization:

Date: 8/7/2001 Ambient Temperature ______________ deg. C.

Operator(s) Michael Rogers

Comment
Redid 3 piece mandrel U/S position 1 check.

Fiducial – Measured Coordinates	z	x	y
	(in)	(in)	(in)
TB1	-2.6216	11.2302	16.2071
TB2	2.5842	11.2576	16.1982
TB3	-2.5824	-11.2468	16.2010
TB4	2.5867	-11.2519	16.1983
TB5	-1.5330	-15.2008	-4.8245
TB6	2.3855	-15.2005	-4.7799

(For x, y corrected coordinates, use SLAC data if available. If not, use IHEP data.)

Fiducial – Corrected Coordinates	z	x	y
	(in)	(in)	(in)
TB1
TB2
TB3
TB4
TB5
TB6

Check Measurements:

Rod	xmeasured	xnominal	ymeasured	ynominal
R1	10.5014	10.5 in	14.8059	14.8 in
R2	10.5014	10.5 in	14.8067	14.8 in
R3	-10.4975	-10.5 in	14.8076	14.8 in
R4	-10.4996	-10.5 in	14.8068	14.8 in

Cylinder at Different Positions

Position 1 (x,y)=(0,0)	x (in)	y (in)
Position 2	0.0022	-0.0004
Position 3	0.0021	-0.0020
Position 4	-0.0006	-0.0014

Approval __________________