Quadrupole Magnet Checks			15Q-013
	Date:	Magnet:	Operator(s):
	12/18/2001	15Q-013
	Notes:

Magnetic Fiducial Coordinates: (inches)
	Fiducial	Z	X	Y
	TB1	-2.5849	11.2457	16.2012
	TB2	2.5585	11.2344	16.2020
	TB3	-2.5736	-11.2441	16.2029	Offset:
	TB4	2.5787	-11.2356	16.1993	0.0000	inches
	TB5	-1.4893	-15.2004	-4.7281
	TB6	2.3295	-15.2013	-4.7261
	Description:
	Fiducial values based on the measured mechanical center line.

Quadrupole Mechanical Centerline Checks:

Mandrel Check (4 Positions):	X (in)	Y (in)
Position 1	-0.0002	-0.0001
Position 2	0.0017	0.0002
Position 3	0.0002	-0.0022
Position 4	-0.0013	-0.0024

Mandrel Check (Position 1):	X (in)	Y (in)
Position 1 (1^st check)	-0.0011	-0.0029
Position 1 (2^nd check)	-0.0006	-0.0035
Position 1 (3^rd check)	-0.0004	-0.0030
Position 1 (4^th check if necc)	NA	NA
Position 1 (5^th check if necc)	NA	NA

Quadrupole Gap Measurement Checks

Gap Measurements:
Upstream (in)	Downstream (in)
Loc 1: 1.022	Loc 1: 1.023
Loc 2: 1.022	Loc 2: 1.022

Approval __________________

Quadrupole Magnet Fiducialization Traveller

Approval must be obtained before removing the magnet from the test stand.

Magnetic Measurements Approval by – Jack Tanabe or Tony King.

Magnet Serial Number 15Q-013

IHEP Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

SLAC Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

Fiducialization:

Date: 12/18/2001 Ambient Temperature ______________ deg. C.

Operator(s)

Comment

Fiducial – Measured Coordinates	z	x	y
	(in)	(in)	(in)
TB1	-2.5849	11.2457	16.2012
TB2	2.5585	11.2344	16.2020
TB3	-2.5736	-11.2441	16.2029
TB4	2.5787	-11.2356	16.1993
TB5	-1.4893	-15.2004	-4.7281
TB6	2.3295	-15.2013	-4.7261

(For x, y corrected coordinates, use SLAC data if available. If not, use IHEP data.)

Fiducial – Corrected Coordinates	z	x	y
	(in)	(in)	(in)
TB1
TB2
TB3
TB4
TB5
TB6

Check Measurements:

Rod	xmeasured	xnominal	ymeasured	ynominal
R1	10.4998	10.5 in	14.8046	14.8 in
R2	10.5003	10.5 in	14.8051	14.8 in
R3	-10.5036	-10.5 in	14.8061	14.8 in
R4	-10.5014	-10.5 in	14.8051	14.8 in

Cylinder at Different Positions

Position 1 (x,y)=(0,0)	x (in)	y (in)
Position 2	0.0018	0.0003
Position 3	0.0004	-0.0022
Position 4	-0.0011	-0.0024

Approval __________________