Quadrupole Magnet Checks

 

15Q-007

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Date:

 

Magnet:

 

 

 

Operator(s):

 

 

 

 

 6/13/2001

 

 15Q-007

 

 

 

 Michael Rogers

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Notes:

 

 

 

 

 

 

 

 

 

 

 Due to Printer malfunction there is no paper data after Tooling ball #4. Transfered  the tooling ball values of 5 and 6 from computer file.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Magnetic Fiducial Coordinates: (inches)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fiducial

Z

X

Y

 

 

 

 

 

 

 

TB1

-2.5793

 11.2520

 16.1992

 

 

 

 

 

 

 

TB2

 2.5616

 11.2488

 16.2021

 

 

 

 

 

 

 

TB3

-2.5838

-11.2543

 16.2092

 

 

Offset:

 

 

 

 

TB4

 2.5738

-11.2455

 16.1963

 

 

0.0000

 inches

 

 

 

TB5

-1.5343

-15.2002

-4.8058

 

 

 

 

 

 

 

TB6

 2.3753

-15.2072

-4.8393

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

 

 

 

 

 

 

 

 

 

Fiducial values based on the measured mechanical center line.

 

 

 

 

 

 

 

 

 

 

 

 


 

 

 

 

 

 

Quadrupole Mechanical Centerline Checks:

 

Mandrel Check (4 Positions):

X (in)

Y (in)

Position 1

 0.0000

 0.0000

Position 2

 0.0025

-0.0010

Position 3

 0.0017

-0.0027

Position 4

-0.0012

-0.0018

Mandrel Check (Position 1):

X (in)

Y (in)

Position 1 (1st check)

-0.0001

-0.0010

Position 1 (2nd check)

 0.0001

-0.0010

Position 1 (3rd check)

 0.0001

-0.0006

Position 1 (4th check if necc)

NA

NA

Position 1 (5th check if necc)

NA

NA

 

 

 

 

 

 

 

Quadrupole Gap Measurement Checks

 

 

 

Gap Measurements:

 

Upstream (in)

Downstream (in)

Loc 1: 1.023

Loc 1: 1.024

Loc 2: 1.023

Loc 2: 1.023

 

Approval __________________


 

 

 

 

 

 

Quadrupole Magnet Fiducialization Traveller

Approval must be obtained before removing the magnet from the test stand. 

Magnetic Measurements Approval by – Jack Tanabe or Tony King.

Magnet Serial Number 15Q-007

IHEP Magnetic Measurements Operator: ____________   Date:_____________

Measured Magnetic Center Offset  Dx =__________ mm  Dy =___________ mm  

Measured at:  Integrated Field:  ____________ T-m @ Current_____________ Amps

SLAC Magnetic Measurements Operator: ____________   Date:_____________

Measured Magnetic Center Offset  Dx =__________ mm  Dy =___________ mm  

Measured at:  Integrated Field:  ____________ T-m @ Current_____________ Amps

Fiducialization:

Date: 6/13/2001    Ambient Temperature ______________ deg. C. 

Operator(s)  Michael Rogers

Comment
Due to Printer malfunction there is no paper data after Tooling ball #4. Transfered  the tooling ball values of 5 and 6 from computer file.

 

Fiducial – Measured

Coordinates

z

x

y

(in)

(in)

(in)

TB1

-2.5793

11.2520

16.1992

TB2

2.5616

11.2488

16.2021

TB3

-2.5838

-11.2543

16.2092

TB4

2.5738

-11.2455

16.1963

TB5

-1.5343

-15.2002

-4.8058

TB6

2.3753

-15.2072

-4.8393

 (For x, y corrected coordinates, use SLAC data if available.  If not, use IHEP data.)

Fiducial – Corrected

Coordinates

z

x

y

(in)

(in)

(in)

TB1

 

 

 

TB2

 

 

 

TB3

 

 

 

TB4

 

 

 

TB5

 

 

 

TB6

 

 

 

Check Measurements:

Rod

xmeasured

xnominal

ymeasured

ynominal

R1

 10.5006

10.5 in

 14.8049

14.8 in

R2

 10.4999

10.5 in

 14.8039

14.8 in

R3

-10.5001

-10.5 in

 14.8051

14.8 in

R4

-10.4999

-10.5 in

 14.8037

14.8 in

Cylinder at Different Positions

Position 1 (x,y)=(0,0)

x (in)

y (in)

Position 2

 0.0026

-0.0010

Position 3

 0.0017

-0.0028

Position 4

-0.0012

-0.0019

Approval __________________