Quadrupole Magnet Checks			34Q-034
	Date:	Magnet:	Operator(s):
	8/06/01	34Q-034
	Notes:
	Redid d/s 3 piece mandrel position 1 check

Magnetic Fiducial Coordinates: (inches)
	Fiducial	Z	X	Y
	TB1	-6.1184	10.8756	16.2009
	TB2	6.1022	10.8497	16.2014
	TB3	-6.0424	-10.8357	16.2027	Offset:
	TB4	6.1362	-10.8711	16.2013	0.0000	inches
	TB5	-5.1954	-15.1995	-4.7588
	TB6	4.6748	-15.2015	-4.7208
	Description:
	Fiducial values based on the measured mechanical center line.

Quadrupole Mechanical Centerline Checks:

Mandrel Check (4 Positions):	X (in)	Y (in)
Position 1	-0.0001	0.0003
Position 2	0.0001	0.0005
Position 3	0.0004	0.0002
Position 4	0.0000	-0.0003

Mandrel Check (Position 1):	X (in)	Y (in)
Position 1 (1^st check)	0.0006	0.0006
Position 1 (2^nd check)	0.0044	-0.0076
Position 1 (3^rd check)	-0.0001	0.0016
Position 1 (4^th check if necc)	NA	NA
Position 1 (5^th check if necc)	NA	NA

Quadrupole Gap Measurement Checks

Gap Measurements:
Upstream (in)	Downstream (in)
Loc 1: 1.023	Loc 1: 1.023
Loc 2: 1.023	Loc 2: 1.023

Approval __________________

Quadrupole Magnet Fiducialization Traveller

Approval must be obtained before removing the magnet from the test stand.

Magnetic Measurements Approval by – Jack Tanabe or Tony King.

Magnet Serial Number 34Q-034

IHEP Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

SLAC Magnetic Measurements Operator: ____________ Date:_____________

Measured Magnetic Center Offset Dx =__________ mm Dy =___________ mm

Measured at: Integrated Field: ____________ T-m @ Current_____________ Amps

Fiducialization:

Date: 8/06/01 Ambient Temperature ______________ deg. C.

Operator(s)

Comment
Redid d/s 3 piece mandrel position 1 check

Fiducial – Measured Coordinates	z	x	y
	(in)	(in)	(in)
TB1	-6.1184	10.8756	16.2009
TB2	6.1022	10.8497	16.2014
TB3	-6.0424	-10.8357	16.2027
TB4	6.1362	-10.8711	16.2013
TB5	-5.1954	-15.1995	-4.7588
TB6	4.6748	-15.2015	-4.7208

(For x, y corrected coordinates, use SLAC data if available. If not, use IHEP data.)

Fiducial – Corrected Coordinates	z	x	y
	(in)	(in)	(in)
TB1
TB2
TB3
TB4
TB5
TB6

Check Measurements:

Rod	xmeasured	xnominal	ymeasured	ynominal
R1	10.4999	10.5 in	14.8080	14.8 in
R2	10.5015	10.5 in	14.8127	14.8 in
R3	-10.5008	-10.5 in	14.8089	14.8 in
R4	-10.5017	-10.5 in	14.8076	14.8 in

Cylinder at Different Positions

Position 1 (x,y)=(0,0)	x (in)	y (in)
Position 2	0.0002	0.0002
Position 3	0.0005	-0.0001
Position 4	0.0001	-0.0006

Approval __________________