Chapter 41 Table of Contents. View the entire chapter in a PDF format. Please use the pdf for printing.

Standards (Section 3)

SLAC adheres to the following standards for its hoisting and rigging program.

• Title 29, Code of Federal Regulations, Part 1910, "Occupational Safety and Health Standards"
• Section 1910.184, "Slings" (29 CFR 1910.184)
• Section 1910.179, "Overhead and Gantry Cranes" (29 CFR 1910.179)
• Section 1910.180, "Crawler Locomotive and Truck Cranes" (29 CFR 1910.180)
• Section 1926.251, "Rigging equipment for material handling" (29 CFR 1926.251)
• Section 1926.550, "Cranes and Derricks" (29 CFR 1926.550)
• Section 1926.554, "Overhead Hoists" (29 CFR 1926.554)
  online 1926s can be found by using "Code of Federal Regulations: Retrieve by CFR Citation"

• Title 8, California Code of Regulations
• Section 5022, "Proof Load Test and Examination of Cranes and Their Accessory Gear" (8 CCR 5022)
• Cal/OSHA Plate V crane certification for overhead bridge cranes greater than three tons in lifting capacity

• Department of Energy Standard 1090, "Hoisting and Rigging" (DOE-STD-1090-2004) and third-party standards referenced therein (three ways to get to it below)
  - "Online Approved DOE Technical Standards"
  - Direct DOE website for DOE-STD-1090-2004 Hoisting and Rigging Standard
  - full printable copy [pdf] (426 pages, large download) (compiled as of 5/11/07 - check the DOE website to verify latest version)

continue to Definitions (4)